基于C语言实现的aes256加密算法示例

 更新时间:2017年02月20日 10:17:07   作者:酷云  
这篇文章主要介绍了基于C语言实现的aes256加密算法,结合具体实例形式详细分析了C语言实现的aes256加密算法实现步骤与使用技巧,需要的朋友可以参考下

本文实例讲述了基于C语言实现的aes256加密算法。分享给大家供大家参考,具体如下:

aes256.h:

#ifndef uint8_t
#define uint8_t unsigned char
#endif
#ifdef __cplusplus
extern "C" { 
#endif
  typedef struct {
    uint8_t key[32]; 
    uint8_t enckey[32]; 
    uint8_t deckey[32];
  } aes256_context; 
  void aes256_init(aes256_context *, uint8_t * );
  void aes256_done(aes256_context *);
  void aes256_encrypt_ecb(aes256_context *, uint8_t * );
  void aes256_decrypt_ecb(aes256_context *, uint8_t * );
#ifdef __cplusplus
}
#endif

aes256.c:

#include "aes256.h"
#define F(x)  (((x)<<1) ^ ((((x)>>7) & 1) * 0x1b))
#define FD(x) (((x) >> 1) ^ (((x) & 1) ? 0x8d : 0))
// #define BACK_TO_TABLES
#ifdef BACK_TO_TABLES
const uint8_t sbox[256] = {
  0x63, 0x7c, 0x77, 0x7b, 0xf2, 0x6b, 0x6f, 0xc5,
  0x30, 0x01, 0x67, 0x2b, 0xfe, 0xd7, 0xab, 0x76,
  0xca, 0x82, 0xc9, 0x7d, 0xfa, 0x59, 0x47, 0xf0,
  0xad, 0xd4, 0xa2, 0xaf, 0x9c, 0xa4, 0x72, 0xc0,
  0xb7, 0xfd, 0x93, 0x26, 0x36, 0x3f, 0xf7, 0xcc,
  0x34, 0xa5, 0xe5, 0xf1, 0x71, 0xd8, 0x31, 0x15,
  0x04, 0xc7, 0x23, 0xc3, 0x18, 0x96, 0x05, 0x9a,
  0x07, 0x12, 0x80, 0xe2, 0xeb, 0x27, 0xb2, 0x75,
  0x09, 0x83, 0x2c, 0x1a, 0x1b, 0x6e, 0x5a, 0xa0,
  0x52, 0x3b, 0xd6, 0xb3, 0x29, 0xe3, 0x2f, 0x84,
  0x53, 0xd1, 0x00, 0xed, 0x20, 0xfc, 0xb1, 0x5b,
  0x6a, 0xcb, 0xbe, 0x39, 0x4a, 0x4c, 0x58, 0xcf,
  0xd0, 0xef, 0xaa, 0xfb, 0x43, 0x4d, 0x33, 0x85,
  0x45, 0xf9, 0x02, 0x7f, 0x50, 0x3c, 0x9f, 0xa8,
  0x51, 0xa3, 0x40, 0x8f, 0x92, 0x9d, 0x38, 0xf5,
  0xbc, 0xb6, 0xda, 0x21, 0x10, 0xff, 0xf3, 0xd2,
  0xcd, 0x0c, 0x13, 0xec, 0x5f, 0x97, 0x44, 0x17,
  0xc4, 0xa7, 0x7e, 0x3d, 0x64, 0x5d, 0x19, 0x73,
  0x60, 0x81, 0x4f, 0xdc, 0x22, 0x2a, 0x90, 0x88,
  0x46, 0xee, 0xb8, 0x14, 0xde, 0x5e, 0x0b, 0xdb,
  0xe0, 0x32, 0x3a, 0x0a, 0x49, 0x06, 0x24, 0x5c,
  0xc2, 0xd3, 0xac, 0x62, 0x91, 0x95, 0xe4, 0x79,
  0xe7, 0xc8, 0x37, 0x6d, 0x8d, 0xd5, 0x4e, 0xa9,
  0x6c, 0x56, 0xf4, 0xea, 0x65, 0x7a, 0xae, 0x08,
  0xba, 0x78, 0x25, 0x2e, 0x1c, 0xa6, 0xb4, 0xc6,
  0xe8, 0xdd, 0x74, 0x1f, 0x4b, 0xbd, 0x8b, 0x8a,
  0x70, 0x3e, 0xb5, 0x66, 0x48, 0x03, 0xf6, 0x0e,
  0x61, 0x35, 0x57, 0xb9, 0x86, 0xc1, 0x1d, 0x9e,
  0xe1, 0xf8, 0x98, 0x11, 0x69, 0xd9, 0x8e, 0x94,
  0x9b, 0x1e, 0x87, 0xe9, 0xce, 0x55, 0x28, 0xdf,
  0x8c, 0xa1, 0x89, 0x0d, 0xbf, 0xe6, 0x42, 0x68,
  0x41, 0x99, 0x2d, 0x0f, 0xb0, 0x54, 0xbb, 0x16
};
const uint8_t sboxinv[256] = {
  0x52, 0x09, 0x6a, 0xd5, 0x30, 0x36, 0xa5, 0x38,
  0xbf, 0x40, 0xa3, 0x9e, 0x81, 0xf3, 0xd7, 0xfb,
  0x7c, 0xe3, 0x39, 0x82, 0x9b, 0x2f, 0xff, 0x87,
  0x34, 0x8e, 0x43, 0x44, 0xc4, 0xde, 0xe9, 0xcb,
  0x54, 0x7b, 0x94, 0x32, 0xa6, 0xc2, 0x23, 0x3d,
  0xee, 0x4c, 0x95, 0x0b, 0x42, 0xfa, 0xc3, 0x4e,
  0x08, 0x2e, 0xa1, 0x66, 0x28, 0xd9, 0x24, 0xb2,
  0x76, 0x5b, 0xa2, 0x49, 0x6d, 0x8b, 0xd1, 0x25,
  0x72, 0xf8, 0xf6, 0x64, 0x86, 0x68, 0x98, 0x16,
  0xd4, 0xa4, 0x5c, 0xcc, 0x5d, 0x65, 0xb6, 0x92,
  0x6c, 0x70, 0x48, 0x50, 0xfd, 0xed, 0xb9, 0xda,
  0x5e, 0x15, 0x46, 0x57, 0xa7, 0x8d, 0x9d, 0x84,
  0x90, 0xd8, 0xab, 0x00, 0x8c, 0xbc, 0xd3, 0x0a,
  0xf7, 0xe4, 0x58, 0x05, 0xb8, 0xb3, 0x45, 0x06,
  0xd0, 0x2c, 0x1e, 0x8f, 0xca, 0x3f, 0x0f, 0x02,
  0xc1, 0xaf, 0xbd, 0x03, 0x01, 0x13, 0x8a, 0x6b,
  0x3a, 0x91, 0x11, 0x41, 0x4f, 0x67, 0xdc, 0xea,
  0x97, 0xf2, 0xcf, 0xce, 0xf0, 0xb4, 0xe6, 0x73,
  0x96, 0xac, 0x74, 0x22, 0xe7, 0xad, 0x35, 0x85,
  0xe2, 0xf9, 0x37, 0xe8, 0x1c, 0x75, 0xdf, 0x6e,
  0x47, 0xf1, 0x1a, 0x71, 0x1d, 0x29, 0xc5, 0x89,
  0x6f, 0xb7, 0x62, 0x0e, 0xaa, 0x18, 0xbe, 0x1b,
  0xfc, 0x56, 0x3e, 0x4b, 0xc6, 0xd2, 0x79, 0x20,
  0x9a, 0xdb, 0xc0, 0xfe, 0x78, 0xcd, 0x5a, 0xf4,
  0x1f, 0xdd, 0xa8, 0x33, 0x88, 0x07, 0xc7, 0x31,
  0xb1, 0x12, 0x10, 0x59, 0x27, 0x80, 0xec, 0x5f,
  0x60, 0x51, 0x7f, 0xa9, 0x19, 0xb5, 0x4a, 0x0d,
  0x2d, 0xe5, 0x7a, 0x9f, 0x93, 0xc9, 0x9c, 0xef,
  0xa0, 0xe0, 0x3b, 0x4d, 0xae, 0x2a, 0xf5, 0xb0,
  0xc8, 0xeb, 0xbb, 0x3c, 0x83, 0x53, 0x99, 0x61,
  0x17, 0x2b, 0x04, 0x7e, 0xba, 0x77, 0xd6, 0x26,
  0xe1, 0x69, 0x14, 0x63, 0x55, 0x21, 0x0c, 0x7d
};
#define rj_sbox(x)   sbox[(x)]
#define rj_sbox_inv(x) sboxinv[(x)]
#else
uint8_t gf_alog(uint8_t x) // calculate anti-logarithm gen 3
{
  uint8_t atb = 1, z;
  while (x--) {z = atb; atb <<= 1; if (z & 0x80) atb^= 0x1b; atb ^= z;}
  return atb;
}
uint8_t gf_log(uint8_t x) // calculate logarithm gen 3
{
  uint8_t atb = 1, i = 0, z;
  do {
    if (atb == x) break;
    z = atb; atb <<= 1; if (z & 0x80) atb^= 0x1b; atb ^= z;
  } while (++i > 0);
  return i;
}
uint8_t gf_mulinv(uint8_t x) // calculate multiplicative inverse
{
  return (x) ? gf_alog(255 - gf_log(x)) : 0;
}
uint8_t rj_sbox(uint8_t x)
{
  uint8_t y, sb;
  sb = y = gf_mulinv(x);
  y = (y<<1)|(y>>7); sb ^= y; y = (y<<1)|(y>>7); sb ^= y; 
  y = (y<<1)|(y>>7); sb ^= y; y = (y<<1)|(y>>7); sb ^= y;
  return (sb ^ 0x63);
}
uint8_t rj_sbox_inv(uint8_t x)
{
  uint8_t y, sb;
  y = x ^ 0x63;
  sb = y = (y<<1)|(y>>7);
  y = (y<<2)|(y>>6); sb ^= y; y = (y<<3)|(y>>5); sb ^= y;
  return gf_mulinv(sb);
}
#endif
uint8_t rj_xtime(uint8_t x) 
{
  return (x & 0x80) ? ((x << 1) ^ 0x1b) : (x << 1);
}
void aes_subBytes(uint8_t *buf)
{
  register uint8_t i = 16;
  while (i--) buf[i] = rj_sbox(buf[i]);
}
void aes_subBytes_inv(uint8_t *buf)
{
  register uint8_t i = 16;
  while (i--) buf[i] = rj_sbox_inv(buf[i]);
}
void aes_addRoundKey(uint8_t *buf, uint8_t *key)
{
  register uint8_t i = 16;
  while (i--) buf[i] ^= key[i];
}
void aes_addRoundKey_cpy(uint8_t *buf, uint8_t *key, uint8_t *cpk)
{
  register uint8_t i = 16;
  while (i--) buf[i] ^= (cpk[i] = key[i]), cpk[16+i] = key[16 + i];
}
void aes_shiftRows(uint8_t *buf)
{
  register uint8_t i, j;
  i = buf[1]; buf[1] = buf[5]; buf[5] = buf[9]; buf[9] = buf[13]; buf[13] = i;
  i = buf[10]; buf[10] = buf[2]; buf[2] = i;
  j = buf[3]; buf[3] = buf[15]; buf[15] = buf[11]; buf[11] = buf[7]; buf[7] = j;
  j = buf[14]; buf[14] = buf[6]; buf[6] = j;
}
void aes_shiftRows_inv(uint8_t *buf)
{
  register uint8_t i, j;
  i = buf[1]; buf[1] = buf[13]; buf[13] = buf[9]; buf[9] = buf[5]; buf[5] = i;
  i = buf[2]; buf[2] = buf[10]; buf[10] = i;
  j = buf[3]; buf[3] = buf[7]; buf[7] = buf[11]; buf[11] = buf[15]; buf[15] = j;
  j = buf[6]; buf[6] = buf[14]; buf[14] = j;
}
void aes_mixColumns(uint8_t *buf)
{
  register uint8_t i, a, b, c, d, e;
  for (i = 0; i < 16; i += 4)
  {
    a = buf[i]; b = buf[i + 1]; c = buf[i + 2]; d = buf[i + 3];
    e = a ^ b ^ c ^ d;
    buf[i] ^= e ^ rj_xtime(a^b);  buf[i+1] ^= e ^ rj_xtime(b^c);
    buf[i+2] ^= e ^ rj_xtime(c^d); buf[i+3] ^= e ^ rj_xtime(d^a);
  }
}
void aes_mixColumns_inv(uint8_t *buf)
{
  register uint8_t i, a, b, c, d, e, x, y, z;
  for (i = 0; i < 16; i += 4)
  {
    a = buf[i]; b = buf[i + 1]; c = buf[i + 2]; d = buf[i + 3];
    e = a ^ b ^ c ^ d;
    z = rj_xtime(e);
    x = e ^ rj_xtime(rj_xtime(z^a^c)); y = e ^ rj_xtime(rj_xtime(z^b^d));
    buf[i] ^= x ^ rj_xtime(a^b);  buf[i+1] ^= y ^ rj_xtime(b^c);
    buf[i+2] ^= x ^ rj_xtime(c^d); buf[i+3] ^= y ^ rj_xtime(d^a);
  }
}
void aes_expandEncKey(uint8_t *k, uint8_t *rc) 
{
  register uint8_t i;
  k[0] ^= rj_sbox(k[29]) ^ (*rc);
  k[1] ^= rj_sbox(k[30]);
  k[2] ^= rj_sbox(k[31]);
  k[3] ^= rj_sbox(k[28]);
  *rc = F( *rc);
  for(i = 4; i < 16; i += 4) k[i] ^= k[i-4],  k[i+1] ^= k[i-3],
    k[i+2] ^= k[i-2], k[i+3] ^= k[i-1];
  k[16] ^= rj_sbox(k[12]);
  k[17] ^= rj_sbox(k[13]);
  k[18] ^= rj_sbox(k[14]);
  k[19] ^= rj_sbox(k[15]);
  for(i = 20; i < 32; i += 4) k[i] ^= k[i-4],  k[i+1] ^= k[i-3],
    k[i+2] ^= k[i-2], k[i+3] ^= k[i-1];
}
void aes_expandDecKey(uint8_t *k, uint8_t *rc) 
{
  uint8_t i;
  for(i = 28; i > 16; i -= 4) k[i+0] ^= k[i-4], k[i+1] ^= k[i-3], 
    k[i+2] ^= k[i-2], k[i+3] ^= k[i-1];
  k[16] ^= rj_sbox(k[12]);
  k[17] ^= rj_sbox(k[13]);
  k[18] ^= rj_sbox(k[14]);
  k[19] ^= rj_sbox(k[15]);
  for(i = 12; i > 0; i -= 4) k[i+0] ^= k[i-4], k[i+1] ^= k[i-3],
    k[i+2] ^= k[i-2], k[i+3] ^= k[i-1];
  *rc = FD(*rc);
  k[0] ^= rj_sbox(k[29]) ^ (*rc);
  k[1] ^= rj_sbox(k[30]);
  k[2] ^= rj_sbox(k[31]);
  k[3] ^= rj_sbox(k[28]);
}
void aes256_init(aes256_context *ctx, uint8_t *k)
{
  uint8_t rcon = 1;
  register uint8_t i;
  for (i = 0; i < sizeof(ctx->key); i++) ctx->enckey[i] = ctx->deckey[i] = k[i];
  for (i = 8;--i;) aes_expandEncKey(ctx->deckey, &rcon);
}
void aes256_done(aes256_context *ctx)
{
  register uint8_t i;
  for (i = 0; i < sizeof(ctx->key); i++) 
    ctx->key[i] = ctx->enckey[i] = ctx->deckey[i] = 0;
}
void aes256_encrypt_ecb(aes256_context *ctx, uint8_t *buf)
{
  uint8_t i, rcon;
  aes_addRoundKey_cpy(buf, ctx->enckey, ctx->key);
  for(i = 1, rcon = 1; i < 14; ++i)
  {
    aes_subBytes(buf);
    aes_shiftRows(buf);
    aes_mixColumns(buf);
    if( i & 1 ) aes_addRoundKey( buf, &ctx->key[16]);
    else aes_expandEncKey(ctx->key, &rcon), aes_addRoundKey(buf, ctx->key);
  }
  aes_subBytes(buf);
  aes_shiftRows(buf);
  aes_expandEncKey(ctx->key, &rcon); 
  aes_addRoundKey(buf, ctx->key);
}
void aes256_decrypt_ecb(aes256_context *ctx, uint8_t *buf)
{
  uint8_t i, rcon;
  aes_addRoundKey_cpy(buf, ctx->deckey, ctx->key);
  aes_shiftRows_inv(buf);
  aes_subBytes_inv(buf);
  for (i = 14, rcon = 0x80; --i;)
  {
    if( ( i & 1 ) )      
    {
      aes_expandDecKey(ctx->key, &rcon);
      aes_addRoundKey(buf, &ctx->key[16]);
    }
    else aes_addRoundKey(buf, ctx->key);
    aes_mixColumns_inv(buf);
    aes_shiftRows_inv(buf);
    aes_subBytes_inv(buf);
  }
  aes_addRoundKey( buf, ctx->key); 
}

demo.c:

#include
#include
#include "aes256.h"
#define DUMP(s, i, buf, sz) {printf(s);          /
               for (i = 0; i < (sz);i++)  /
                 printf("x ", buf[i]); /
               printf("/n");}
int main (int argc, char *argv[])
{
  aes256_context ctx; 
  uint8_t key[32];
  uint8_t buf[16], i;
  for (i = 0; i < sizeof(buf);i++) buf[i] = i * 16 + i;
  for (i = 0; i < sizeof(key);i++) key[i] = i;
  DUMP("txt: ", i, buf, sizeof(buf));
  DUMP("key: ", i, key, sizeof(key));
  printf("---/n");
  aes256_init(&ctx, key);
  aes256_encrypt_ecb(&ctx, buf);
  DUMP("enc: ", i, buf, sizeof(buf));
  printf("tst: 8e a2 b7 ca 51 67 45 bf ea fc 49 90 4b 49 60 89/n");
  aes256_init(&ctx, key);
  aes256_decrypt_ecb(&ctx, buf);
  DUMP("dec: ", i, buf, sizeof(buf));
  aes256_done(&ctx);
  return 0;
}

PS:关于加密解密感兴趣的朋友还可以参考本站在线工具:

MD5在线加密工具:
http://tools.jb51.net/password/CreateMD5Password

迅雷、快车、旋风URL加密/解密工具:
http://tools.jb51.net/password/urlrethunder

在线散列/哈希算法加密工具:
http://tools.jb51.net/password/hash_encrypt

在线MD5/hash/SHA-1/SHA-2/SHA-256/SHA-512/SHA-3/RIPEMD-160加密工具:
http://tools.jb51.net/password/hash_md5_sha

在线sha1/sha224/sha256/sha384/sha512加密工具:
http://tools.jb51.net/password/sha_encode

希望本文所述对大家C语言程序设计有所帮助。

相关文章

  • Qt中暂停程序的几种方法小结

    Qt中暂停程序的几种方法小结

    本文主要介绍了Qt中暂停程序的几种方法小结,包含了4种方式,文中通过示例代码介绍的非常详细,对大家的学习或者工作具有一定的参考学习价值,需要的朋友们下面随着小编来一起学习学习吧
    2024-07-07
  • 教你分辨C++堆与栈的区别

    教你分辨C++堆与栈的区别

    堆与栈的区别有:1、栈由系统自动分配,而堆是人为申请开辟;2、栈获得的空间较小,而堆获得的空间较大;3、栈由系统自动分配,速度较快,而堆一般速度比较慢;4、栈是连续的空间,而堆是不连续的空间
    2021-06-06
  • C语言中#pragma pack(1)的用法与注意点

    C语言中#pragma pack(1)的用法与注意点

    #pragma用于指示编译器完成一些特定的动作,下面这篇文章主要给大家介绍了关于C语言中#pragma pack(1)的用法与注意点的相关资料,文中通过实例代码介绍的非常详细,需要的朋友可以参考下
    2023-02-02
  • 浅谈C++性能榨汁机之伪共享

    浅谈C++性能榨汁机之伪共享

    使给定内存位置被一个线程所访问,可能还是会有乒乓缓存的存在,是因为另一种叫做伪共享(false sharing)的效应。即使数据存储在缓存行中,多个线程对数据中的成员进行访问时,硬件缓存还是会产生乒乓缓存。本文将介绍C++中的伪共享
    2021-06-06
  • 计时器的time_t和clock_t 的两种实现方法(推荐)

    计时器的time_t和clock_t 的两种实现方法(推荐)

    下面小编就为大家带来一篇计时器的time_t和clock_t 的两种实现方法(推荐)。小编觉得挺不错的,现在就分享给大家,也给大家做个参考。一起跟随小编过来看看吧
    2016-10-10
  • c++ 基于opencv 识别、定位二维码

    c++ 基于opencv 识别、定位二维码

    这篇文章主要介绍了c++ 基于opencv 识别、定位二维码,帮助大家更好的理解和学习使用c++,感兴趣的朋友可以了解下
    2021-03-03
  • 扩展KMP算法(Extend KMP)

    扩展KMP算法(Extend KMP)

    我们这里说的KMP不是拿来放电影的(虽然我很喜欢这个软件),而是一种算法。KMP算法是拿来处理字符串匹配的。今天我们谈到的是对KMP算法的拓展
    2014-08-08
  • C++知识点之inline函数、回调函数和普通函数

    C++知识点之inline函数、回调函数和普通函数

    这篇文章主要给大家介绍了关于C++知识点之inline函数、回调函数和普通函数的相关使用方法,以及回调函数和普通函数的区别小结,文中通过示例代码介绍的非常详细,需要的朋友可以参考下
    2021-07-07
  • OpenCV cv.Mat与.txt文件数据的读写操作

    OpenCV cv.Mat与.txt文件数据的读写操作

    这篇文章主要介绍了OpenCV cv.Mat 与 .txt 文件数据的读写操作,现在分享给大家,也给大家做个参考
    2018-05-05
  • C++中的对象初始化操作代码

    C++中的对象初始化操作代码

    对象初始化可以分为默认初始化、直接初始化、拷贝初始化以及值初始化。本文重点给大家介绍C++中的对象初始化操作代码,感兴趣的朋友跟随小编一起看看吧
    2021-12-12

最新评论