详解Spring中Bean的加载的方法
之前写过bean的解析,这篇来讲讲bean的加载,加载要比bean的解析复杂些,从之前的例子开始.
Spring中加载一个bean的方式:
TestBean bean = factory.getBean("testBean");
来看看getBean(String name)方法源码,
@Override public Object getBean(String name) throws BeansException { return doGetBean(name, null, null, false); }
该getBean(String name)方法位于AbstractBeanFactory抽象类中,AbstractBeanFactory与XmlBeanFactory类关系可以看下图:
接下去跟进doGetBean()方法源码:
protected <T> T doGetBean( final String name, final Class<T> requiredType, final Object[] args, boolean typeCheckOnly) throws BeansException { // 提取beanName final String beanName = transformedBeanName(name); Object bean; // 试着从缓存或实例工厂中获取 Object sharedInstance = getSingleton(beanName); if (sharedInstance != null && args == null) { if (logger.isDebugEnabled()) { if (isSingletonCurrentlyInCreation(beanName)) { logger.debug("Returning eagerly cached instance of singleton bean '" + beanName + "' that is not fully initialized yet - a consequence of a circular reference"); } else { logger.debug("Returning cached instance of singleton bean '" + beanName + "'"); } } // 返回实例,有时存在如BeanFactory这样情况时并不是直接返回实例本身而是返回指定方法返回的实例 bean = getObjectForBeanInstance(sharedInstance, name, beanName, null); } else { // Fail if we're already creating this bean instance: // We're assumably within a circular reference. if (isPrototypeCurrentlyInCreation(beanName)) { throw new BeanCurrentlyInCreationException(beanName); } // Check if bean definition exists in this factory. BeanFactory parentBeanFactory = getParentBeanFactory(); // 如果在所有已经加载的类中没有beanName则会尝试从parentBeanFactory中检测 if (parentBeanFactory != null && !containsBeanDefinition(beanName)) { // Not found -> check parent. String nameToLookup = originalBeanName(name); // 到BeanFactory查找 if (args != null) { // Delegation to parent with explicit args. return (T) parentBeanFactory.getBean(nameToLookup, args); } else { // No args -> delegate to standard getBean method. return parentBeanFactory.getBean(nameToLookup, requiredType); } } // 如果不是只做类型检查则是创建bean if (!typeCheckOnly) { markBeanAsCreated(beanName); } try { // 将存储XML配置文件的GernericBeanDefinition转换成RootBeanDefinition,如果BeanName是子Bean的话会合并父类的相关属性 final RootBeanDefinition mbd = getMergedLocalBeanDefinition(beanName); checkMergedBeanDefinition(mbd, beanName, args); // Guarantee initialization of beans that the current bean depends on. String[] dependsOn = mbd.getDependsOn(); // 如果存在依赖的话要递归实例化依赖的bean if (dependsOn != null) { for (String dependsOnBean : dependsOn) { if (isDependent(beanName, dependsOnBean)) { throw new BeanCreationException(mbd.getResourceDescription(), beanName, "Circular depends-on relationship between '" + beanName + "' and '" + dependsOnBean + "'"); } registerDependentBean(dependsOnBean, beanName); getBean(dependsOnBean); } } // Create bean instance. // 依赖的bean实例化完后就可以实例化mbd了 if (mbd.isSingleton()) { sharedInstance = getSingleton(beanName, new ObjectFactory<Object>() { @Override public Object getObject() throws BeansException { try { return createBean(beanName, mbd, args); } catch (BeansException ex) { // Explicitly remove instance from singleton cache: It might have been put there // eagerly by the creation process, to allow for circular reference resolution. // Also remove any beans that received a temporary reference to the bean. destroySingleton(beanName); throw ex; } } }); bean = getObjectForBeanInstance(sharedInstance, name, beanName, mbd); } else if (mbd.isPrototype()) { // It's a prototype -> create a new instance. Object prototypeInstance = null; try { beforePrototypeCreation(beanName); prototypeInstance = createBean(beanName, mbd, args); } finally { afterPrototypeCreation(beanName); } bean = getObjectForBeanInstance(prototypeInstance, name, beanName, mbd); } else { // 在对应的scope上实例化bean String scopeName = mbd.getScope(); final Scope scope = this.scopes.get(scopeName); if (scope == null) { throw new IllegalStateException("No Scope registered for scope '" + scopeName + "'"); } try { Object scopedInstance = scope.get(beanName, new ObjectFactory<Object>() { @Override public Object getObject() throws BeansException { beforePrototypeCreation(beanName); try { return createBean(beanName, mbd, args); } finally { afterPrototypeCreation(beanName); } } }); bean = getObjectForBeanInstance(scopedInstance, name, beanName, mbd); } catch (IllegalStateException ex) { throw new BeanCreationException(beanName, "Scope '" + scopeName + "' is not active for the current thread; " + "consider defining a scoped proxy for this bean if you intend to refer to it from a singleton", ex); } } } catch (BeansException ex) { cleanupAfterBeanCreationFailure(beanName); throw ex; } } // 检查需要的类型是否符合实例bean的实际类型 if (requiredType != null && bean != null && !requiredType.isAssignableFrom(bean.getClass())) { try { return getTypeConverter().convertIfNecessary(bean, requiredType); } catch (TypeMismatchException ex) { if (logger.isDebugEnabled()) { logger.debug("Failed to convert bean '" + name + "' to required type [" + ClassUtils.getQualifiedName(requiredType) + "]", ex); } throw new BeanNotOfRequiredTypeException(name, requiredType, bean.getClass()); } } return (T) bean; }
整个bean加载的过程步骤相对繁琐,主要步骤有以下几点:
1、转换beanName
要知道平时开发中传入的参数name可能只是别名,也可能是FactoryBean,所以需要进行解析转换,一般会进行以下解析:
(1)消除修饰符,比如name="&test",会去除&使name="test";
(2)取alias表示的最后的beanName,比如别名test01指向名称为test02的bean则返回test02。
2、从缓存中加载实例
实例在Spring的同一个容器中只会被创建一次,后面再想获取该bean时,就会尝试从缓存中获取;如果获取不到的话再从singletonFactories中加载。
3、实例化bean
缓存中记录的bean一般只是最原始的bean状态,这时就需要对bean进行实例化。如果得到的是bean的原始状态,但又要对bean进行处理,这时真正需要的是工厂bean中定义的factory-method方法中返回的bean,上面源码中的getObjectForBeanInstance就是来完成这个工作的。
4、检测parentBeanFacotory
从源码可以看出如果缓存中没有数据会转到父类工厂去加载,源码中的!containsBeanDefinition(beanName)就是检测如果当前加载的xml配置文件中不包含beanName所对应的配置,就只能到parentBeanFacotory去尝试加载bean。
5、存储XML配置文件的GernericBeanDefinition转换成RootBeanDefinition之前的文章介绍过XML配置文件中读取到的bean信息是存储在GernericBeanDefinition中的,但Bean的后续处理是针对于RootBeanDefinition的,所以需要转换后才能进行后续操作。
6、初始化依赖的bean
这里应该比较好理解,就是bean中可能依赖了其他bean属性,在初始化bean之前会先初始化这个bean所依赖的bean属性。
7、创建bean
Spring容器根据不同scope创建bean实例。
整个流程就是如此,下面会讲解一些重要步骤的源码。
上面有提到,单例在Spring中的同一容器中只会被创建一次,后面再获取bean的话会直接从缓存中获取,这里是尝试加载,先从缓存中加载,再次就是从singletonFactories中加载;因为在bean中可能会在依赖注入,要避免循环依赖,Spring创建bean时会不等bean创建完成就会将创建该bean的ObjectFactory提前曝光加入到缓存中,但下一个bean创建时要依赖上个bean的话,就直接使用ObjectFacotry。
@Override public Object getSingleton(String beanName) { return getSingleton(beanName, true); // true表示允许早期依赖 } protected Object getSingleton(String beanName, boolean allowEarlyReference) { // 尝试从缓存获取实例 Object singletonObject = this.singletonObjects.get(beanName); if (singletonObject == null && isSingletonCurrentlyInCreation(beanName)) { synchronized (this.singletonObjects) { // 若该bean正在加载则不处理 singletonObject = this.earlySingletonObjects.get(beanName); if (singletonObject == null && allowEarlyReference) { ObjectFactory<?> singletonFactory = this.singletonFactories.get(beanName); if (singletonFactory != null) { singletonObject = singletonFactory.getObject(); // 存入到缓存中 this.earlySingletonObjects.put(beanName, singletonObject); this.singletonFactories.remove(beanName); } } } } return (singletonObject != NULL_OBJECT ? singletonObject : null); } /* 这两个方法在DefaultSingletonBeanRegistry类中 */
从源码可以看出这个方法先尝试从singletonObjects中获取实例,如果获取不到值就从earlySingletonObject中去获取,如果再获取不到的话则到singletonFactories里获取beanName对应的ObjectFactory,再调用这个ObjectFactory的getObject来创建bean,并放到earlySingletonObject中,并且从singletonFactories里remove掉这个ObjectFactory。这里有几个存储bean的不同map:
- -singletonObjects:保存BeanName和创建bean实例之间的关系。
- -singletonFactories:保存BeanName和创建bean实例的工厂之间的关系。
- -earlySingletonObject:保存BeanName和创建bean实例之间的关系,与-singletonObjects不同的是当一个单例bean被放到里面后,那当bean在创建过程中,就可以通过getBean方法获取到,可以用来检测循环引用。
- -registeredSingletons:保存当前所有已注册的bean。
如果上面缓存中不存在已经加载的单例bean就要重新开始bean的加载过程了,Spring中使用getSingleton重载方法实现bean的加载过程。
public Object getSingleton(String beanName, ObjectFactory<?> singletonFactory) { Assert.notNull(beanName, "'beanName' must not be null"); synchronized (this.singletonObjects) { // 先检查bean是否已经加载 Object singletonObject = this.singletonObjects.get(beanName); // 如果空才进行singleton的bean的初始化 if (singletonObject == null) { if (this.singletonsCurrentlyInDestruction) { throw new BeanCreationNotAllowedException(beanName, "Singleton bean creation not allowed while the singletons of this factory are in destruction " + "(Do not request a bean from a BeanFactory in a destroy method implementation!)"); } if (logger.isDebugEnabled()) { logger.debug("Creating shared instance of singleton bean '" + beanName + "'"); } beforeSingletonCreation(beanName); boolean newSingleton = false; boolean recordSuppressedExceptions = (this.suppressedExceptions == null); if (recordSuppressedExceptions) { this.suppressedExceptions = new LinkedHashSet<Exception>(); } try { // 初始化bean singletonObject = singletonFactory.getObject(); newSingleton = true; } catch (IllegalStateException ex) { // Has the singleton object implicitly appeared in the meantime -> // if yes, proceed with it since the exception indicates that state. singletonObject = this.singletonObjects.get(beanName); if (singletonObject == null) { throw ex; } } catch (BeanCreationException ex) { if (recordSuppressedExceptions) { for (Exception suppressedException : this.suppressedExceptions) { ex.addRelatedCause(suppressedException); } } throw ex; } finally { if (recordSuppressedExceptions) { this.suppressedExceptions = null; } afterSingletonCreation(beanName); } if (newSingleton) { // 存入缓存 addSingleton(beanName, singletonObject); } } return (singletonObject != NULL_OBJECT ? singletonObject : null); } }
这段代码使用了回调方法,使程序可以在单例创建的前后做一些准备及处理操作,真正的获取单例bean的方法其实并不是在这个方法实现的,而是在ObjectFactory类型的实例singletonFactory中实现的。
下面准备创建bean
看看createBean()方法源码(该方法在AbstractAutowireCapableBeanFactory类中):
protected Object createBean(final String beanName, final RootBeanDefinition mbd, final Object[] args) throws BeanCreationException { if (logger.isDebugEnabled()) { logger.debug("Creating instance of bean '" + beanName + "'"); } // 锁定class,根据设置的class属性或根据className来解析Class resolveBeanClass(mbd, beanName); // 验证和准备覆盖的方法 try { mbd.prepareMethodOverrides(); } catch (BeanDefinitionValidationException ex) { throw new BeanDefinitionStoreException(mbd.getResourceDescription(), beanName, "Validation of method overrides failed", ex); } try { // 用BeanPostProcessors返回代理来替代真正的实例 Object bean = resolveBeforeInstantiation(beanName, mbd); if (bean != null) { return bean; } } catch (Throwable ex) { throw new BeanCreationException(mbd.getResourceDescription(), beanName, "BeanPostProcessor before instantiation of bean failed", ex); } Object beanInstance = doCreateBean(beanName, mbd, args); if (logger.isDebugEnabled()) { logger.debug("Finished creating instance of bean '" + beanName + "'"); } return beanInstance; }
从createBean()方法源码可以看出主要做了以下操作:
- 根据设置的class属性或根据className来解析Class;
- 对覆盖进行标记并验证,在Spring配置中是存在lookup-mothod和replace-method的,这两个配置的加载其实就是将配置统一存放在BeanDefinition中的methodOverrides属性里,这个方法的操作也就是针对于这两个配置的;
- 应用初始化前的后处理器,最后创建bean。
在createBean()方法里执行完resolveBeforeInstantiation方法后,如果创建了代理且不为空的话就直接返回,否则需要进行常规bean的创建,这个创建过程是在doCreateBean中完成的,跟进源码:
protected Object doCreateBean(final String beanName, final RootBeanDefinition mbd, final Object[] args) { // Instantiate the bean. BeanWrapper instanceWrapper = null; if (mbd.isSingleton()) { instanceWrapper = this.factoryBeanInstanceCache.remove(beanName); } if (instanceWrapper == null) { // 根据指定bean使用相应策略创建实例 instanceWrapper = createBeanInstance(beanName, mbd, args); } final Object bean = (instanceWrapper != null ? instanceWrapper.getWrappedInstance() : null); Class<?> beanType = (instanceWrapper != null ? instanceWrapper.getWrappedClass() : null); // Allow post-processors to modify the merged bean definition. synchronized (mbd.postProcessingLock) { if (!mbd.postProcessed) { applyMergedBeanDefinitionPostProcessors(mbd, beanType, beanName); mbd.postProcessed = true; } } // 检测循环依赖,是否需要提早曝光 boolean earlySingletonExposure = (mbd.isSingleton() && this.allowCircularReferences && isSingletonCurrentlyInCreation(beanName)); if (earlySingletonExposure) { if (logger.isDebugEnabled()) { logger.debug("Eagerly caching bean '" + beanName + "' to allow for resolving potential circular references"); } // 避免循环依赖,可以在bean初始化完成前将创建实例的ObjectFactory加入工厂 addSingletonFactory(beanName, new ObjectFactory<Object>() { @Override public Object getObject() throws BeansException { // 对bean再次依赖引用 // AOP也是在这里将advice动态织入bean中,若没有则直接返回bean,不做处理 return getEarlyBeanReference(beanName, mbd, bean); } }); } // Initialize the bean instance. Object exposedObject = bean; try { // 填充bean,注入属性值,如果存在依赖于其他bean的属性,会递归初始化 populateBean(beanName, mbd, instanceWrapper); if (exposedObject != null) { // 调用初始化方法 exposedObject = initializeBean(beanName, exposedObject, mbd); } } catch (Throwable ex) { if (ex instanceof BeanCreationException && beanName.equals(((BeanCreationException) ex).getBeanName())) { throw (BeanCreationException) ex; } else { throw new BeanCreationException(mbd.getResourceDescription(), beanName, "Initialization of bean failed", ex); } } if (earlySingletonExposure) { Object earlySingletonReference = getSingleton(beanName, false); // earlySingletonReference只有在检测到有循环依赖的情况下才会不为空 if (earlySingletonReference != null) { if (exposedObject == bean) { exposedObject = earlySingletonReference; } else if (!this.allowRawInjectionDespiteWrapping && hasDependentBean(beanName)) { String[] dependentBeans = getDependentBeans(beanName); Set<String> actualDependentBeans = new LinkedHashSet<String>(dependentBeans.length); for (String dependentBean : dependentBeans) { // 检测依赖 if (!removeSingletonIfCreatedForTypeCheckOnly(dependentBean)) { actualDependentBeans.add(dependentBean); } } if (!actualDependentBeans.isEmpty()) { throw new BeanCurrentlyInCreationException(beanName, "Bean with name '" + beanName + "' has been injected into other beans [" + StringUtils.collectionToCommaDelimitedString(actualDependentBeans) + "] in its raw version as part of a circular reference, but has eventually been " + "wrapped. This means that said other beans do not use the final version of the " + "bean. This is often the result of over-eager type matching - consider using " + "'getBeanNamesOfType' with the 'allowEagerInit' flag turned off, for example."); } } } } // Register bean as disposable. try { // 依据scopse注册bean registerDisposableBeanIfNecessary(beanName, bean, mbd); } catch (BeanDefinitionValidationException ex) { throw new BeanCreationException(mbd.getResourceDescription(), beanName, "Invalid destruction signature", ex); } return exposedObject; }
上面源码完成的操作可以概括为以下几点:
- 开始是单例的话要先清除缓存;
- 实例化bean,将BeanDefinition转换为BeanWrapper;
- 使用MergedBeanDefinitionPostProcessor,Autowired注解就是通过此方法实现类型的预解析;
- 解决循环依赖问题;
- 填充属性,将属性填充到bean实例中;
- 注册DisposableBean;
- 创建完成并返回
接下来创建bean实例,看createBeanInstance()方法:
protected BeanWrapper createBeanInstance(String beanName, RootBeanDefinition mbd, Object[] args) { // 解析class Class<?> beanClass = resolveBeanClass(mbd, beanName); if (beanClass != null && !Modifier.isPublic(beanClass.getModifiers()) && !mbd.isNonPublicAccessAllowed()) { throw new BeanCreationException(mbd.getResourceDescription(), beanName, "Bean class isn't public, and non-public access not allowed: " + beanClass.getName()); } // 若工厂方法不为空则使用工厂方法初始化 if (mbd.getFactoryMethodName() != null) { return instantiateUsingFactoryMethod(beanName, mbd, args); } // Shortcut when re-creating the same bean... boolean resolved = false; boolean autowireNecessary = false; if (args == null) { synchronized (mbd.constructorArgumentLock) { if (mbd.resolvedConstructorOrFactoryMethod != null) { resolved = true; autowireNecessary = mbd.constructorArgumentsResolved; } } } // 如果已经解析过则使用解析好的构造方法不需要再次锁定 if (resolved) { if (autowireNecessary) { // 构造方法自动注入 return autowireConstructor(beanName, mbd, null, null); } else { // 使用默认构造方法 return instantiateBean(beanName, mbd); } } // 根据参数解析构造方法 Constructor<?>[] ctors = determineConstructorsFromBeanPostProcessors(beanClass, beanName); if (ctors != null || mbd.getResolvedAutowireMode() == RootBeanDefinition.AUTOWIRE_CONSTRUCTOR || mbd.hasConstructorArgumentValues() || !ObjectUtils.isEmpty(args)) { return autowireConstructor(beanName, mbd, ctors, args); } // No special handling: simply use no-arg constructor. return instantiateBean(beanName, mbd); }
可以看出如果在RootBeanDefinition中存在factoryMethodName属性,或者说配置文件中配置了factory-method,那么Spring会尝试使用instantiateUsingFactoryMethod(beanName, mbd, args)方法根据RootBeanDefinition中的配置生成bean实例。
再解析构造方法并进行实例化,Spring会根据参数及类型判断使用哪个构造方法再进行实例化。判断调用哪个构造方法的过程会采用缓存机制,如果已经解析过则不需要重复解析而是从RootBeanDefinition中的属性resolvedConstructorOrFactoryMethod缓存的值去取,不然则需要再次解析。
创建bean后接下来就进行属性注入,属性注入的操作在populateBean()方法中,跟进源码:
protected void populateBean(String beanName, RootBeanDefinition mbd, BeanWrapper bw) { PropertyValues pvs = mbd.getPropertyValues(); if (bw == null) { if (!pvs.isEmpty()) { throw new BeanCreationException( mbd.getResourceDescription(), beanName, "Cannot apply property values to null instance"); } else { // Skip property population phase for null instance. return; } } // Give any InstantiationAwareBeanPostProcessors the opportunity to modify the // state of the bean before properties are set. This can be used, for example, // to support styles of field injection. boolean continueWithPropertyPopulation = true; if (!mbd.isSynthetic() && hasInstantiationAwareBeanPostProcessors()) { for (BeanPostProcessor bp : getBeanPostProcessors()) { if (bp instanceof InstantiationAwareBeanPostProcessor) { InstantiationAwareBeanPostProcessor ibp = (InstantiationAwareBeanPostProcessor) bp; if (!ibp.postProcessAfterInstantiation(bw.getWrappedInstance(), beanName)) { continueWithPropertyPopulation = false; break; } } } } if (!continueWithPropertyPopulation) { return; } if (mbd.getResolvedAutowireMode() == RootBeanDefinition.AUTOWIRE_BY_NAME || mbd.getResolvedAutowireMode() == RootBeanDefinition.AUTOWIRE_BY_TYPE) { MutablePropertyValues newPvs = new MutablePropertyValues(pvs); // Add property values based on autowire by name if applicable. if (mbd.getResolvedAutowireMode() == RootBeanDefinition.AUTOWIRE_BY_NAME) { autowireByName(beanName, mbd, bw, newPvs); } // Add property values based on autowire by type if applicable. if (mbd.getResolvedAutowireMode() == RootBeanDefinition.AUTOWIRE_BY_TYPE) { autowireByType(beanName, mbd, bw, newPvs); } pvs = newPvs; } boolean hasInstAwareBpps = hasInstantiationAwareBeanPostProcessors(); boolean needsDepCheck = (mbd.getDependencyCheck() != RootBeanDefinition.DEPENDENCY_CHECK_NONE); if (hasInstAwareBpps || needsDepCheck) { PropertyDescriptor[] filteredPds = filterPropertyDescriptorsForDependencyCheck(bw, mbd.allowCaching); if (hasInstAwareBpps) { for (BeanPostProcessor bp : getBeanPostProcessors()) { if (bp instanceof InstantiationAwareBeanPostProcessor) { InstantiationAwareBeanPostProcessor ibp = (InstantiationAwareBeanPostProcessor) bp; pvs = ibp.postProcessPropertyValues(pvs, filteredPds, bw.getWrappedInstance(), beanName); if (pvs == null) { return; } } } } if (needsDepCheck) { checkDependencies(beanName, mbd, filteredPds, pvs); } } applyPropertyValues(beanName, mbd, bw, pvs); }
在populateBean方法的中的主要处理流程:
- InstantiationAwareBeanPostProcessor处理器的postProcessAfterInstantiation方法控制程序是否继续填充属性;
- 根据注入类型提取依赖的bean,并存入PropertyValues中;
- 应用InstantiationAwareBeanPostProcessor处理器的postProcessPropertyValues方法对属性在填充前再次处理,主要还是验证属性;
- 将所有PropertyValues中的属性填充到BeanWrapper中。
最后初始化bean
学过Spring的都知道bean配置时有一个init-method属性,这个属性的作用是在bean实例化前调用init-method指定的方法进行需要的实例化操作,现在就进入这个方法了;Spring中程序已经执行过bean的实例化,并且进行了属性的填充,而就在这时将会调用用户设定的初始化方法。
protected Object initializeBean(final String beanName, final Object bean, RootBeanDefinition mbd) { if (System.getSecurityManager() != null) { AccessController.doPrivileged(new PrivilegedAction<Object>() { @Override public Object run() { invokeAwareMethods(beanName, bean); return null; } }, getAccessControlContext()); } else { // 特殊bean处理 invokeAwareMethods(beanName, bean); } Object wrappedBean = bean; if (mbd == null || !mbd.isSynthetic()) { wrappedBean = applyBeanPostProcessorsBeforeInitialization(wrappedBean, beanName); } try { invokeInitMethods(beanName, wrappedBean, mbd); } catch (Throwable ex) { throw new BeanCreationException( (mbd != null ? mbd.getResourceDescription() : null), beanName, "Invocation of init method failed", ex); } if (mbd == null || !mbd.isSynthetic()) { wrappedBean = applyBeanPostProcessorsAfterInitialization(wrappedBean, beanName); } return wrappedBean; }
最后加载完Bean并执行完初始化操作后,一个bean的加载基本就结束了。
以上就是本文的全部内容,希望对大家的学习有所帮助,也希望大家多多支持脚本之家。
相关文章
深度剖析Java成员变量、局部变量和静态变量的创建和回收时机
这篇文章主要介绍了深度剖析Java成员变量、局部变量和静态变量的创建和回收时机,成员变量是定义在类中的变量,每个类的实例都会拥有自己的成员变量。它们的生命周期与对象的创建和销毁相对应,下面我将详细介绍它们的特点和生命周期,需要的朋友可以参考下2023-07-07浅谈Spring中@NotEmpty、@NotBlank、@NotNull区别
本文主要介绍了浅谈Spring中@NotEmpty、@NotBlank、@NotNull区别,文中通过示例代码介绍的非常详细,对大家的学习或者工作具有一定的参考学习价值,需要的朋友们下面随着小编来一起学习学习吧2023-02-02
最新评论