Centos7 Redis主从搭建配置的实现

更新时间：2018年06月30日 09:23:04 作者：Lancger

这篇文章主要介绍了Centos7 Redis主从搭建配置的实现,小编觉得挺不错的，现在分享给大家，也给大家做个参考。一起跟随小编过来看看吧

一、环境介绍

Redis—master 172.18.8.19
Redis—slave 172.18.8.20

二、redis主的配置

#创建redis数据目录
mkdir -p /data0/redis_trade

#redis主配置文件
root># cat redis_6379.conf |grep -Ev "^$|^#"
bind 172.18.8.19
protected-mode yes
port 6379
tcp-backlog 511
timeout 0
tcp-keepalive 300
daemonize yes
supervised no
pidfile /var/run/redis_6379.pid
loglevel notice
logfile "/var/log/redis_6379.log"
databases 16
save 900 1
save 300 10
save 60 10000
stop-writes-on-bgsave-error yes
rdbcompression yes
rdbchecksum yes
dbfilename dump_6379.rdb
dir /data0/redis_trade
slave-serve-stale-data yes
slave-read-only yes
repl-diskless-sync no
repl-diskless-sync-delay 5
repl-disable-tcp-nodelay no
slave-priority 100
requirepass Allwelltokok
appendonly yes
appendfilename "appendonly_6379.aof"
appendfsync everysec
no-appendfsync-on-rewrite no
auto-aof-rewrite-percentage 100
auto-aof-rewrite-min-size 64mb
aof-load-truncated yes
lua-time-limit 5000
slowlog-log-slower-than 10000
slowlog-max-len 128
latency-monitor-threshold 0
notify-keyspace-events ""
hash-max-ziplist-entries 512
hash-max-ziplist-value 64
list-max-ziplist-size -2
list-compress-depth 0
set-max-intset-entries 512
zset-max-ziplist-entries 128
zset-max-ziplist-value 64
hll-sparse-max-bytes 3000
activerehashing yes
rename-command FLUSHALL ZYzv6FOBdwflW2nX
rename-command EVAL S9UHPKEpSvUJMM
rename-command FLUSHDB D60FPVDJuip7gy6l
client-output-buffer-limit normal 0 0 0
client-output-buffer-limit slave 256mb 64mb 60
client-output-buffer-limit pubsub 32mb 8mb 60
hz 10
aof-rewrite-incremental-fsync yes

三、redis从配置

root># cat redis_6379.conf |grep -Ev "^$|^#"
bind 172.18.8.20
protected-mode yes
port 6379
tcp-backlog 511
timeout 0
tcp-keepalive 300
daemonize yes
supervised no
pidfile /var/run/redis_6379.pid
loglevel notice
logfile "/var/log/redis_6379.log"
databases 16
save 900 1
save 300 10
save 60 10000
stop-writes-on-bgsave-error yes
rdbcompression yes
rdbchecksum yes
dbfilename dump_6379.rdb
dir /data0/redis_trade
slaveof 172.18.8.19 6379   -----从库比主库多这2行配置参数
masterauth Allwelltokok   -----从库比主库多这2行配置参数
slave-serve-stale-data yes
slave-read-only yes
repl-diskless-sync no
repl-diskless-sync-delay 5
repl-disable-tcp-nodelay no
slave-priority 100
requirepass Allwelltokok
appendonly yes
appendfilename "appendonly_6379.aof"
appendfsync everysec
no-appendfsync-on-rewrite no
auto-aof-rewrite-percentage 100
auto-aof-rewrite-min-size 64mb
aof-load-truncated yes
lua-time-limit 5000
slowlog-log-slower-than 10000
slowlog-max-len 128
latency-monitor-threshold 0
notify-keyspace-events ""
hash-max-ziplist-entries 512
hash-max-ziplist-value 64
list-max-ziplist-size -2
list-compress-depth 0
set-max-intset-entries 512
zset-max-ziplist-entries 128
zset-max-ziplist-value 64
hll-sparse-max-bytes 3000
activerehashing yes
rename-command FLUSHALL ZYzv6FOBdwflW2nX
rename-command EVAL S9UHPKEpSvUJMM
rename-command FLUSHDB D60FPVDJuip7gy6l
client-output-buffer-limit normal 0 0 0
client-output-buffer-limit slave 256mb 64mb 60
client-output-buffer-limit pubsub 32mb 8mb 60
hz 10
aof-rewrite-incremental-fsync yes

四、redis启动脚本

root># cat /etc/init.d/redis_6379 
#!/bin/sh
#
# Simple Redis init.d script conceived to work on Linux systems
# as it does use of the /proc filesystem.
# chkconfig:  2345 90 10

source /etc/init.d/functions
REDISPORT=6379
EXEC=/usr/local/bin/redis-server
CLIEXEC=/usr/local/bin/redis-cli
 
PIDFILE=/var/run/redis_${REDISPORT}.pid
CONF="/usr/local/redis/etc/redis_${REDISPORT}.conf"
AUTH="Allwelltokok"
BIND_IP='172.18.8.19'
 
start(){
   
  if [ -f $PIDFILE ]
  then
    echo "$PIDFILE exists, process is already running or crashed"
  else
    echo "Starting Redis server..."
    $EXEC $CONF
  fi
  if [ "$?"="0" ] 
  then 
    echo "Redis is running..." 
  fi 
 
 
}
 
stop(){
 
  if [ ! -f $PIDFILE ]
  then
    echo "$PIDFILE does not exist, process is not running"
  else
    PID=$(cat $PIDFILE)
    echo "Stopping ..."
    $CLIEXEC -h $BIND_IP -a $AUTH -p $REDISPORT SHUTDOWN 
    sleep 1
    while [ -x /proc/${PID} ]
    do
      echo "Waiting for Redis to shutdown ..."
      sleep 1
    done
      echo "Redis stopped"
  fi
}
 
restart(){
  stop
  start
 
}
status(){
 
  ps -ef|grep redis-server|grep -v grep >/dev/null 2>&1
 
  if [ $? -eq 0 ];then
 
    echo "redis server is running"
 
  else
    echo "redis server is stopped"
 
  fi
   
 
}
 
 
case "$1" in
  start)
    start
    ;;
  stop)
    stop
    ;;
     
  restart)
    restart
    ;;
     
  status)
    status
    ;;   
  *)
   
   echo "Usage: /etc/init.d/redis {start|stop|status|start}" >&2 
   exit 1 
esac

五、启动服务

root># /etc/init.d/redis_6379 start

查看日志

root># tail -100f /var/log/redis_6379.log
5563:S 29 Jun 22:14:23.236 * Increased maximum number of open files to 10032 (it was originally set to 1024).
        _._                         
      _.-``__ ''-._                       
   _.-``  `. `_. ''-._      Redis 3.2.12 (00000000/0) 64 bit
 .-`` .-```. ```\/  _.,_ ''-._                  
 (  '   ,    .-` | `,  )   Running in standalone mode
 |`-._`-...-` __...-.``-._|'` _.-'|   Port: 6379
 |  `-._  `._  /   _.-'  |   PID: 5563
 `-._  `-._ `-./ _.-'  _.-'                  
 |`-._`-._  `-.__.-'  _.-'_.-'|                 
 |  `-._`-._    _.-'_.-'  |      http://redis.io    
 `-._  `-._`-.__.-'_.-'  _.-'                  
 |`-._`-._  `-.__.-'  _.-'_.-'|                 
 |  `-._`-._    _.-'_.-'  |                 
 `-._  `-._`-.__.-'_.-'  _.-'                  
   `-._  `-.__.-'  _.-'                    
     `-._    _.-'                      
       `-.__.-'                        

5563:S 29 Jun 22:14:23.237 # Server started, Redis version 3.2.12
5563:S 29 Jun 22:14:23.237 * The server is now ready to accept connections on port 6379
5563:S 29 Jun 22:14:23.237 * Connecting to MASTER 172.18.8.19:6379
5563:S 29 Jun 22:14:23.237 * MASTER <-> SLAVE sync started
5563:S 29 Jun 22:14:23.237 * Non blocking connect for SYNC fired the event.
5563:S 29 Jun 22:14:23.238 * Master replied to PING, replication can continue...
5563:S 29 Jun 22:14:23.238 * Partial resynchronization not possible (no cached master)
5563:S 29 Jun 22:14:23.239 * Full resync from master: c9f303069f87253011bf39369366732a2e88b389:1
5563:S 29 Jun 22:14:23.304 * MASTER <-> SLAVE sync: receiving 77 bytes from master
5563:S 29 Jun 22:14:23.305 * MASTER <-> SLAVE sync: Flushing old data
5563:S 29 Jun 22:14:23.305 * MASTER <-> SLAVE sync: Loading DB in memory
5563:S 29 Jun 22:14:23.305 * MASTER <-> SLAVE sync: Finished with success
5563:S 29 Jun 22:14:23.305 * Background append only file rewriting started by pid 5567
5563:S 29 Jun 22:14:23.329 * AOF rewrite child asks to stop sending diffs.
5567:C 29 Jun 22:14:23.329 * Parent agreed to stop sending diffs. Finalizing AOF...
5567:C 29 Jun 22:14:23.329 * Concatenating 0.00 MB of AOF diff received from parent.
5567:C 29 Jun 22:14:23.329 * SYNC append only file rewrite performed
5567:C 29 Jun 22:14:23.330 * AOF rewrite: 0 MB of memory used by copy-on-write
5563:S 29 Jun 22:14:23.337 * Background AOF rewrite terminated with success
5563:S 29 Jun 22:14:23.337 * Residual parent diff successfully flushed to the rewritten AOF (0.00 MB)
5563:S 29 Jun 22:14:23.337 * Background AOF rewrite finished successfully

以上就是本文的全部内容，希望对大家的学习有所帮助，也希望大家多多支持脚本之家。

您可能感兴趣的文章:

Redis list 类型学习笔记与总结
这篇文章主要介绍了Redis list 类型学习笔记与总结,本文着重讲解了关于List的一些常用方法,比如lpush 方法、lrange 方法、rpush 方法、linsert 方法、 lset 方法等,需要的朋友可以参考下
2015-06-06
Spring Boot 3.0x的Redis 分布式锁的概念和原理
Redis 分布式锁是一种基于 Redis 的分布式锁解决方案,它的原理是利用 Redis 的原子性操作实现锁的获取和释放,从而保证共享资源的独占性,这篇文章主要介绍了适合 Spring Boot 3.0x的Redis 分布式锁,需要的朋友可以参考下
2024-08-08
redis中跳表zset的具体使用
Redis跳表zset是一种结合了跳表和有序集合的高效数据结构,适用于实现排序和大规模数据的快速查询,本文主要介绍了redis中跳表zset的具体使用,感兴趣的可以了解一下
2024-01-01
Redis分布式锁解决超卖问题的使用示例
超卖问题通常出现在多用户并发操作的情况下,即多个用户尝试购买同一件商品,导致商品库存不足或者超卖,本文就来介绍一下超卖问题,感兴趣的可以了解一下
2023-09-09
Redis中Zset类型常用命令的实现
Zset是Redis的一种有序集合数据类型,Zset通过压缩列表和跳跃表两种底层编码方式支持小数据集和大数据集,支持多种操作,包括添加、查询、删除元素以及集合运算等,具有不同的时间复杂度,感兴趣的可以了解一下
2024-10-10
Redis+AOP+自定义注解实现限流
这篇文章主要为大家详细介绍了如何利用Redis+AOP+自定义注解实现个小功能：自定义拦截器限制访问次数，也就是限流，感兴趣的可以了解一下
2022-06-06
聊聊使用RedisTemplat实现简单的分布式锁的问题
这篇文章主要介绍了使用RedisTemplat实现简单的分布式锁问题,文中给大家介绍在SpringBootTest中编写测试模块的详细代码，需要的朋友可以参考下
2021-11-11
WINDOWS中REDIS主从配置实现代码解析
这篇文章主要介绍了WINDOWS中REDIS主从配置实现代码解析,文中通过示例代码介绍的非常详细，对大家的学习或者工作具有一定的参考学习价值,需要的朋友可以参考下
2020-08-08
Redis中散列类型的常用命令小结
散列类型的键值其实也是一种字典解耦，其存储了字段和字段值的映射，但字段值只能是字符串，不支持其他数据类型，所以说散列类型不能嵌套其他的数据类型。下面就来详细介绍下Redis中散列类型的常用命令，有需要的可以参考学习。
2016-09-09
redistemplate下opsForHash操作示例
这篇文章主要为大家介绍了redistemplate下opsForHash操作示例详解，有需要的朋友可以借鉴参考下，希望能够有所帮助，祝大家多多进步，早日升职加薪
2023-07-07

Centos7 Redis主从搭建配置的实现

相关文章

最新评论

大家感兴趣的内容

最近更新的内容

常用在线小工具