Linux系统下快速配置HugePages的完整步骤

 更新时间:2018年11月15日 09:37:52   作者:AlfredZhao  
这篇文章主要给大家介绍了关于如何在Linux系统下快速配置HugePages的完整步骤,文中通过图文介绍的非常详细,对大家的学习或者工作具有一定的参考学习价值,需要的朋友们下面随着小编来一起学习学习吧

前言

关于Linux系统的HugePages与Oracle数据库优化,可以参考熊爷之前的文章,相关概念介绍的非常清晰:

Linux大内存页Oracle数据库优化

本文旨在Linux系统上快速配置HugePages

测试环境:RHEL6.8 + 512G物理内存;Oracle 11.2.0.4 SGA=400G.

1.设置memlock无限制

在/etc/security/limits.conf配置文件中,设置oracle用户memlock无限制:

vi /etc/security/limits.conf

oracle soft memlock unlimited
oracle hard memlock unlimited

2.设置合理的vm.nr_hugepages

在/etc/sysctl.conf配置文件中,设置合理的vm.nr_hugepages值。

运行MOS 401749.1提供的hugepages_settings.sh脚本,直接可以得到建议值。

hugepages_settings.sh脚本内容:

#!/bin/bash
#
# hugepages_settings.sh
#
# Linux bash script to compute values for the
# recommended HugePages/HugeTLB configuration
# on Oracle Linux
#
# Note: This script does calculation for all shared memory
# segments available when the script is run, no matter it
# is an Oracle RDBMS shared memory segment or not.
#
# This script is provided by Doc ID 401749.1 from My Oracle Support 
# http://support.oracle.com

# Welcome text
echo "
This script is provided by Doc ID 401749.1 from My Oracle Support 
(http://support.oracle.com) where it is intended to compute values for 
the recommended HugePages/HugeTLB configuration for the current shared 
memory segments on Oracle Linux. Before proceeding with the execution please note following:
* For ASM instance, it needs to configure ASMM instead of AMM.
* The 'pga_aggregate_target' is outside the SGA and 
you should accommodate this while calculating SGA size.
* In case you changes the DB SGA size, 
as the new SGA will not fit in the previous HugePages configuration, 
it had better disable the whole HugePages, 
start the DB with new SGA size and run the script again.
And make sure that:
* Oracle Database instance(s) are up and running
* Oracle Database 11g Automatic Memory Management (AMM) is not setup 
(See Doc ID 749851.1)
* The shared memory segments can be listed by command:
# ipcs -m


Press Enter to proceed..."

read

# Check for the kernel version
KERN=`uname -r | awk -F. '{ printf("%d.%d\n",$1,$2); }'`

# Find out the HugePage size
HPG_SZ=`grep Hugepagesize /proc/meminfo | awk '{print $2}'`
if [ -z "$HPG_SZ" ];then
echo "The hugepages may not be supported in the system where the script is being executed."
exit 1
fi

# Initialize the counter
NUM_PG=0

# Cumulative number of pages required to handle the running shared memory segments
for SEG_BYTES in `ipcs -m | cut -c44-300 | awk '{print $1}' | grep "[0-9][0-9]*"`
do
MIN_PG=`echo "$SEG_BYTES/($HPG_SZ*1024)" | bc -q`
if [ $MIN_PG -gt 0 ]; then
NUM_PG=`echo "$NUM_PG+$MIN_PG+1" | bc -q`
fi
done

RES_BYTES=`echo "$NUM_PG * $HPG_SZ * 1024" | bc -q`

# An SGA less than 100MB does not make sense
# Bail out if that is the case
if [ $RES_BYTES -lt 100000000 ]; then
echo "***********"
echo "** ERROR **"
echo "***********"
echo "Sorry! There are not enough total of shared memory segments allocated for 
HugePages configuration. HugePages can only be used for shared memory segments 
that you can list by command:

# ipcs -m

of a size that can match an Oracle Database SGA. Please make sure that:
* Oracle Database instance is up and running 
* Oracle Database 11g Automatic Memory Management (AMM) is not configured"
exit 1
fi

# Finish with results
case $KERN in
'2.2') echo "Kernel version $KERN is not supported. Exiting." ;;
'2.4') HUGETLB_POOL=`echo "$NUM_PG*$HPG_SZ/1024" | bc -q`;
echo "Recommended setting: vm.hugetlb_pool = $HUGETLB_POOL" ;;
'2.6') echo "Recommended setting: vm.nr_hugepages = $NUM_PG" ;;
'3.8') echo "Recommended setting: vm.nr_hugepages = $NUM_PG" ;;
'3.10') echo "Recommended setting: vm.nr_hugepages = $NUM_PG" ;;
'4.1') echo "Recommended setting: vm.nr_hugepages = $NUM_PG" ;;
esac

# End

直接运行脚本即可得到对应的建议:

--当启动的实例设置SGA_MAX_SIZE=12G,给出建议:
Recommended setting: vm.nr_hugepages = 6148

--当启动的实例设置SGA_MAX_SIZE=400G,给出建议:
Recommended setting: vm.nr_hugepages = 204805

--当没有启动实例时,会报错提示:
***********
** ERROR **
***********
Sorry! There are not enough total of shared memory segments allocated for 
HugePages configuration. HugePages can only be used for shared memory segments 
that you can list by command:

# ipcs -m

of a size that can match an Oracle Database SGA. Please make sure that:
* Oracle Database instance is up and running 
* Oracle Database 11g Automatic Memory Management (AMM) is not configured

我这里将建议值vm.nr_hugepages = 204805追加到/etc/sysctl.conf配置文件中,然后执行sysctl -p生效配置。

3.确认HugePages设置成功

查看关于HugePages的信息,注意HugePages_Total值是之前设置的204805:

grep Huge /proc/meminfo

# grep Huge /proc/meminfo 
AnonHugePages: 0 kB
HugePages_Total: 204805
HugePages_Free: 168475
HugePages_Rsvd: 168471
HugePages_Surp: 0
Hugepagesize: 2048 kB

数据库在启动时,对应alert日志中会有“Large Pages Information”内容:

Wed Nov 14 14:38:12 2018
Starting ORACLE instance (normal)
************************ Large Pages Information *******************
Per process system memlock (soft) limit = UNLIMITED

Total Shared Global Region in Large Pages = 400 GB (100%)

Large Pages used by this instance: 204801 (400 GB)
Large Pages unused system wide = 4 (8192 KB)
Large Pages configured system wide = 204805 (400 GB)
Large Page size = 2048 KB
********************************************************************

至此可以确认HugePages设置成功。

总结

以上就是这篇文章的全部内容了,希望本文的内容对大家的学习或者工作具有一定的参考学习价值,如果有疑问大家可以留言交流,谢谢大家对脚本之家的支持。

相关文章

  • Centos安装MYSQL8.X的教程

    Centos安装MYSQL8.X的教程

    这篇文章主要介绍了Centos安装MYSQL8.X的教程,本文以CentOS版本为7.6,安装的MySQL版本为8.0.17,感兴趣的朋友跟随小编一起看看吧
    2019-10-10
  • Linux命令行上如何使用日历详解

    Linux命令行上如何使用日历详解

    这篇文章主要给大家介绍了Linux命令行上如何使用日历的相关资料,文中通过示例代码介绍的非常详细,对大家学习或者使用linux具有一定的参考学习价值,需要的朋友们下面随着小编来一起学习学习吧。
    2018-04-04
  • 在linux下开启FTP服务方法介绍

    在linux下开启FTP服务方法介绍

    这篇文章主要介绍了在linux下开启FTP服务方法介绍,具有一定参考价值,需要的朋友可以了解下。
    2017-11-11
  • 详解SSH 远程执行任务的方法

    详解SSH 远程执行任务的方法

    本篇文章主要介绍了详解SSH 远程执行任务的方法,小编觉得挺不错的,现在分享给大家,也给大家做个参考。一起跟随小编过来看看吧
    2017-12-12
  • htaccess 将所有请求重定向到某个URL地址的规则

    htaccess 将所有请求重定向到某个URL地址的规则

    htaccess 将所有请求重定向到某个URL地址的规则,需要的朋友可以参考下。
    2011-04-04
  • Linux中配置DNS正向解析

    Linux中配置DNS正向解析

    本文介绍了如何配置DNS正向解析,包括编辑named.conf文件、abc.zone文件和启动服务,配置中需注意文件格式和权限设置,实验通过配置DNS服务器实现域名到IP的解析,这对网络管理和维护非常重要,关闭防火墙和设置SELinux为disabled是实验的基础环境配置,通过实验
    2024-09-09
  • Ubuntu安装PHP和PHP Nginx配置方法

    Ubuntu安装PHP和PHP Nginx配置方法

    本篇文章主要介绍了Ubuntu安装PHP和PHP Nginx配置方法,具有一定的参考价值,有兴趣的可以了解一下
    2017-08-08
  • CentOS6.5下Tomcat7 Nginx Redis配置步骤教程详解

    CentOS6.5下Tomcat7 Nginx Redis配置步骤教程详解

    这篇文章主要介绍了CentOS6.5下Tomcat7 Nginx Redis配置步骤,本文给大家介绍的非常详细,具有参考借鉴价值,需要的朋友可以参考下
    2016-10-10
  • Apache常用虚拟主机配置方法解析

    Apache常用虚拟主机配置方法解析

    这篇文章主要介绍了Apache常用虚拟主机配置方法解析,文中通过示例代码介绍的非常详细,对大家的学习或者工作具有一定的参考学习价值,需要的朋友可以参考下
    2020-11-11
  • Linux VPS/服务器上轻松导入、导出MySQL数据库的几种方法

    Linux VPS/服务器上轻松导入、导出MySQL数据库的几种方法

    随着网站的运行MySQL数据库也越来越大,备份问题也日益凸显,使用phpmyadmin导出或导入时可能会因为超时文件过大等原因无法导入或导出。
    2010-12-12

最新评论