Python3对称加密算法AES、DES3实例详解
本文实例讲述了Python3对称加密算法AES、DES3。分享给大家供大家参考,具体如下:
python3.6此库安装方式,需要pip3 install pycryptodome。
如有site-packages中存在crypto、pycrypto,在pip之前,需要pip3 uninstall crypto
、pip3 uninstall pycrypto
,否则无法安装成功。
C:\WINDOWS\system32>pip3 install pycryptodome
Collecting pycryptodome
Downloading https://files.pythonhosted.org/packages/0f/5d/a429a53eacae3e13143248c3868c76985bcd0d75858bd4c25b574e51bd4d/pycryptodome-3.6.3-cp36-cp36m-win_amd64.whl (7.9MB)
100% |████████████████████████████████| 7.9MB 111kB/s
Installing collected packages: pycryptodome
Successfully installed pycryptodome-3.6.3
这里顺带说一下pycrypto,这个库已经有很久没有人维护了,如果需要安装此库,需要先安装 VC++ build tools
然后将 ~\BuildTools\VC\Tools\MSVC\14.15.26726\include 目录下的 stdint.h 拷贝到 C:\Program Files (x86)\Windows Kits\10\Include\10.0.17134.0\ucrt 下。(Win10 需管理员权限)
接着将同目录下的 inttypes.h 中的 #include <stdint.h>
(第十四行),改成 #include "stdint.h"
。
然后使用 pip3 install pycrypto
,就能直接安装了。
注:如果不是业务需要,请尽可能使用 pycryptodome。
AES:
import Crypto.Cipher.AES import Crypto.Random import base64 import binascii def auto_fill(x): if len(x) <= 32: while len(x) not in [16, 24, 32]: x += " " return x.encode() else: raise "密钥长度不能大于32位!" key = "asd" content = "abcdefg1234567" x = Crypto.Cipher.AES.new(auto_fill(key), Crypto.Cipher.AES.MODE_ECB) a = base64.encodebytes(x.encrypt(auto_fill(content))) b = x.decrypt(base64.decodebytes(a)) print(a) print(b) a = binascii.b2a_base64(x.encrypt(auto_fill(content))) b = x.decrypt(binascii.a2b_base64(a)) print(a) print(b) key = "dsa" iv = Crypto.Random.new().read(16) # 向量,必须为16字节 content = "1234567abcdefg" y = Crypto.Cipher.AES.new(auto_fill(key), Crypto.Cipher.AES.MODE_CBC, iv) c = binascii.b2a_base64(y.encrypt(auto_fill(content))) z = Crypto.Cipher.AES.new(auto_fill(key), Crypto.Cipher.AES.MODE_CBC, iv) d = z.decrypt(binascii.a2b_base64(c)) print(c) print(d)
运行结果:
b'jr/EIUp32kLHc3ypZZ1cyg==\n'
b'abcdefg1234567 '
b'jr/EIUp32kLHc3ypZZ1cyg==\n'
b'abcdefg1234567 '
b'j+Ul9KQd0HnuiHW3z9tD7A==\n'
b'1234567abcdefg '
DES3:
import Crypto.Cipher.DES3 import base64 import binascii def auto_fill(x): if len(x) > 24: raise "密钥长度不能大于等于24位!" else: while len(x) < 16: x += " " return x.encode() key = "asd" content = "abcdefg1234567" x = Crypto.Cipher.DES3.new(auto_fill(key), Crypto.Cipher.DES3.MODE_ECB) a = base64.encodebytes(x.encrypt(auto_fill(content))) print(a) b = x.decrypt(base64.decodebytes(a)) print(b) a = binascii.b2a_base64(x.encrypt(auto_fill(content))) b = x.decrypt(binascii.a2b_base64(a)) print(a) print(b)
运行结果:
b'/ee3NFKeNqEk/qMNd1mjog==\n'
b'abcdefg1234567 '
b'/ee3NFKeNqEk/qMNd1mjog==\n'
b'abcdefg1234567 '
附:AES的工厂模式封装Cipher_AES.py(封装Crypto.Cipher.AES)
''' Created on 2018年7月7日 @author: ray ''' import Crypto.Cipher.AES import Crypto.Random import base64 import binascii class Cipher_AES: pad_default = lambda x, y: x + (y - len(x) % y) * " ".encode("utf-8") unpad_default = lambda x: x.rstrip() pad_user_defined = lambda x, y, z: x + (y - len(x) % y) * z.encode("utf-8") unpad_user_defined = lambda x, z: x.rstrip(z) pad_pkcs5 = lambda x, y: x + (y - len(x) % y) * chr(y - len(x) % y).encode("utf-8") unpad_pkcs5 = lambda x: x[:-ord(x[-1])] def __init__(self, key="abcdefgh12345678", iv=Crypto.Random.new().read(Crypto.Cipher.AES.block_size)): self.__key = key self.__iv = iv def set_key(self, key): self.__key = key def get_key(self): return self.__key def set_iv(self, iv): self.__iv = iv def get_iv(self): return self.__iv def Cipher_MODE_ECB(self): self.__x = Crypto.Cipher.AES.new(self.__key.encode("utf-8"), Crypto.Cipher.AES.MODE_ECB) def Cipher_MODE_CBC(self): self.__x = Crypto.Cipher.AES.new(self.__key.encode("utf-8"), Crypto.Cipher.AES.MODE_CBC, self.__iv.encode("utf-8")) def encrypt(self, text, cipher_method, pad_method="", code_method=""): if cipher_method.upper() == "MODE_ECB": self.Cipher_MODE_ECB() elif cipher_method.upper() == "MODE_CBC": self.Cipher_MODE_CBC() cipher_text = b"".join([self.__x.encrypt(i) for i in self.text_verify(text.encode("utf-8"), pad_method)]) if code_method.lower() == "base64": return base64.encodebytes(cipher_text).decode("utf-8").rstrip() elif code_method.lower() == "hex": return binascii.b2a_hex(cipher_text).decode("utf-8").rstrip() else: return cipher_text.decode("utf-8").rstrip() def decrypt(self, cipher_text, cipher_method, pad_method="", code_method=""): if cipher_method.upper() == "MODE_ECB": self.Cipher_MODE_ECB() elif cipher_method.upper() == "MODE_CBC": self.Cipher_MODE_CBC() if code_method.lower() == "base64": cipher_text = base64.decodebytes(cipher_text.encode("utf-8")) elif code_method.lower() == "hex": cipher_text = binascii.a2b_hex(cipher_text.encode("utf-8")) else: cipher_text = cipher_text.encode("utf-8") return self.unpad_method(self.__x.decrypt(cipher_text).decode("utf-8"), pad_method) def text_verify(self, text, method): while len(text) > len(self.__key): text_slice = text[:len(self.__key)] text = text[len(self.__key):] yield text_slice else: if len(text) == len(self.__key): yield text else: yield self.pad_method(text, method) def pad_method(self, text, method): if method == "": return Cipher_AES.pad_default(text, len(self.__key)) elif method == "PKCS5Padding": return Cipher_AES.pad_pkcs5(text, len(self.__key)) else: return Cipher_AES.pad_user_defined(text, len(self.__key), method) def unpad_method(self, text, method): if method == "": return Cipher_AES.unpad_default(text) elif method == "PKCS5Padding": return Cipher_AES.unpad_pkcs5(text) else: return Cipher_AES.unpad_user_defined(text, method)
使用方法:
加密:Cipher_AES(key [, iv]).encrypt(text, cipher_method [, pad_method [, code_method]])
解密:Cipher_AES(key [, iv]).decrypt(cipher_text, cipher_method [, pad_method [, code_method]])
key:密钥(长度必须为16、24、32)
iv:向量(长度与密钥一致,ECB模式不需要)
text:明文(需要加密的内容)
cipher_text:密文(需要解密的内容)
cipher_method:加密方法,目前只有"MODE_ECB"、"MODE_CBC"两种
pad_method:填充方式,解决 Java 问题选用"PKCS5Padding"
code_method:编码方式,目前只有"base64"、"hex"两种
来段调用封装类 Cipher_AES 的 demo_Cipher_AES.py,方便大家理解:
import Cipher_AES key = "qwedsazxc123321a" iv = key[::-1] text = "我爱小姐姐,可小姐姐不爱我 - -" cipher_method = "MODE_CBC" pad_method = "PKCS5Padding" code_method = "base64" cipher_text = Cipher_AES(key, iv).encrypt(text, cipher_method, pad_method, code_method) print(cipher_text) text = Cipher_AES(key, iv).decrypt(cipher_text, cipher_method, pad_method, code_method) print(text) ''' 运行结果: uxhf+MoSko4xa+jGOyzJvYH9n5NvrCwEHbwm/A977CmGqzg+fYE0GeL5/M5v9O1o 我爱小姐姐,可小姐姐不爱我 - - '''
PS:关于加密解密感兴趣的朋友还可以参考本站在线工具:
文字在线加密解密工具(包含AES、DES、RC4等):
http://tools.jb51.net/password/txt_encode
MD5在线加密工具:
http://tools.jb51.net/password/CreateMD5Password
在线散列/哈希算法加密工具:
http://tools.jb51.net/password/hash_encrypt
在线MD5/hash/SHA-1/SHA-2/SHA-256/SHA-512/SHA-3/RIPEMD-160加密工具:
http://tools.jb51.net/password/hash_md5_sha
在线sha1/sha224/sha256/sha384/sha512加密工具:
http://tools.jb51.net/password/sha_encode
更多关于Python相关内容感兴趣的读者可查看本站专题:《Python加密解密算法与技巧总结》、《Python编码操作技巧总结》、《Python数据结构与算法教程》、《Python函数使用技巧总结》、《Python字符串操作技巧汇总》、《Python入门与进阶经典教程》及《Python文件与目录操作技巧汇总》
希望本文所述对大家Python程序设计有所帮助。
相关文章
tensorflow 用矩阵运算替换for循环 用tf.tile而不写for的方法
今天小编就为大家分享一篇tensorflow 用矩阵运算替换for循环 用tf.tile而不写for的方法,具有很好的参考价值,希望对大家有所帮助。一起跟随小编过来看看吧2018-07-07
最新评论