tensorflow入门:tfrecord 和tf.data.TFRecordDataset的使用
更新时间：2020年01月20日 10:52:19 作者：yeqiustu
今天小编就为大家分享一篇tensorflow入门:tfrecord 和tf.data.TFRecordDataset的使用，具有很好的参考价值，希望对大家有所帮助。一起跟随小编过来看看吧
1.创建tfrecord
tfrecord支持写入三种格式的数据：string，int64，float32，以列表的形式分别通过tf.train.BytesList、tf.train.Int64List、tf.train.FloatList写入tf.train.Feature，如下所示：
tf.train.Feature(bytes_list=tf.train.BytesList(value=[feature.tostring()])) #feature一般是多维数组，要先转为list tf.train.Feature(int64_list=tf.train.Int64List(value=list(feature.shape))) #tostring函数后feature的形状信息会丢失，把shape也写入 tf.train.Feature(float_list=tf.train.FloatList(value=[label]))
通过上述操作，以dict的形式把要写入的数据汇总，并构建tf.train.Features，然后构建tf.train.Example，如下：
def get_tfrecords_example(feature, label):
tfrecords_features = {}
feat_shape = feature.shape
tfrecords_features['feature'] = tf.train.Feature(bytes_list=tf.train.BytesList(value=[feature.tostring()]))
tfrecords_features['shape'] = tf.train.Feature(int64_list=tf.train.Int64List(value=list(feat_shape)))
tfrecords_features['label'] = tf.train.Feature(float_list=tf.train.FloatList(value=label))
return tf.train.Example(features=tf.train.Features(feature=tfrecords_features))
把创建的tf.train.Example序列化下，便可通过tf.python_io.TFRecordWriter写入tfrecord文件，如下：
tfrecord_wrt = tf.python_io.TFRecordWriter('xxx.tfrecord') #创建tfrecord的writer，文件名为xxx
exmp = get_tfrecords_example(feats[inx], labels[inx]) #把数据写入Example
exmp_serial = exmp.SerializeToString() #Example序列化
tfrecord_wrt.write(exmp_serial) #写入tfrecord文件
tfrecord_wrt.close() #写完后关闭tfrecord的writer
代码汇总：
import tensorflow as tf
from tensorflow.contrib.learn.python.learn.datasets.mnist import read_data_sets
mnist = read_data_sets("MNIST_data/", one_hot=True)
#把数据写入Example
def get_tfrecords_example(feature, label):
tfrecords_features = {}
feat_shape = feature.shape
tfrecords_features['feature'] = tf.train.Feature(bytes_list=tf.train.BytesList(value=[feature.tostring()]))
tfrecords_features['shape'] = tf.train.Feature(int64_list=tf.train.Int64List(value=list(feat_shape)))
tfrecords_features['label'] = tf.train.Feature(float_list=tf.train.FloatList(value=label))
return tf.train.Example(features=tf.train.Features(feature=tfrecords_features))
#把所有数据写入tfrecord文件
def make_tfrecord(data, outf_nm='mnist-train'):
feats, labels = data
outf_nm += '.tfrecord'
tfrecord_wrt = tf.python_io.TFRecordWriter(outf_nm)
ndatas = len(labels)
for inx in range(ndatas):
exmp = get_tfrecords_example(feats[inx], labels[inx])
exmp_serial = exmp.SerializeToString()
tfrecord_wrt.write(exmp_serial)
tfrecord_wrt.close()
import random
nDatas = len(mnist.train.labels)
inx_lst = range(nDatas)
random.shuffle(inx_lst)
random.shuffle(inx_lst)
ntrains = int(0.85*nDatas)
# make training set
data = ([mnist.train.images[i] for i in inx_lst[:ntrains]], \
[mnist.train.labels[i] for i in inx_lst[:ntrains]])
make_tfrecord(data, outf_nm='mnist-train')
# make validation set
data = ([mnist.train.images[i] for i in inx_lst[ntrains:]], \
[mnist.train.labels[i] for i in inx_lst[ntrains:]])
make_tfrecord(data, outf_nm='mnist-val')
# make test set
data = (mnist.test.images, mnist.test.labels)
make_tfrecord(data, outf_nm='mnist-test')
2.tfrecord文件的使用：tf.data.TFRecordDataset
从tfrecord文件创建TFRecordDataset：
dataset = tf.data.TFRecordDataset('xxx.tfrecord')
解析tfrecord文件的每条记录，即序列化后的tf.train.Example；使用tf.parse_single_example来解析：
feats = tf.parse_single_example(serial_exmp, features=data_dict)
其中，data_dict是一个dict，包含的key是写入tfrecord文件时用的key，相应的value则是tf.FixedLenFeature([], tf.string)、tf.FixedLenFeature([], tf.int64)、tf.FixedLenFeature([], tf.float32)，分别对应不同的数据类型，汇总即有：
def parse_exmp(serial_exmp): #label中[10]是因为一个label是一个有10个元素的列表，shape中的[x]为shape的长度
feats = tf.parse_single_example(serial_exmp, features={'feature':tf.FixedLenFeature([], tf.string),\
'label':tf.FixedLenFeature([10],tf.float32), 'shape':tf.FixedLenFeature([x], tf.int64)})
image = tf.decode_raw(feats['feature'], tf.float32)
label = feats['label']
shape = tf.cast(feats['shape'], tf.int32)
return image, label, shape
解析tfrecord文件中的所有记录，使用dataset的map方法，如下：
dataset = dataset.map(parse_exmp)
map方法可以接受任意函数以对dataset中的数据进行处理；另外，可使用repeat、shuffle、batch方法对dataset进行重复、混洗、分批；用repeat复制dataset以进行多个epoch；如下：
dataset = dataset.repeat(epochs).shuffle(buffer_size).batch(batch_size)
解析完数据后，便可以取出数据进行使用，通过创建iterator来进行，如下：
iterator = dataset.make_one_shot_iterator() batch_image, batch_label, batch_shape = iterator.get_next()
要把不同dataset的数据feed进行模型，则需要先创建iterator handle，即iterator placeholder，如下：
handle = tf.placeholder(tf.string, shape=[]) iterator = tf.data.Iterator.from_string_handle(handle, \ dataset_train.output_types, dataset_train.output_shapes) image, label, shape = iterator.get_next()
然后为各个dataset创建handle，以feed_dict传入placeholder，如下：
with tf.Session() as sess:
handle_train, handle_val, handle_test = sess.run(\
[x.string_handle() for x in [iter_train, iter_val, iter_test]])
sess.run([loss, train_op], feed_dict={handle: handle_train}
汇总：
import tensorflow as tf
train_f, val_f, test_f = ['mnist-%s.tfrecord'%i for i in ['train', 'val', 'test']]
def parse_exmp(serial_exmp):
feats = tf.parse_single_example(serial_exmp, features={'feature':tf.FixedLenFeature([], tf.string),\
'label':tf.FixedLenFeature([10],tf.float32), 'shape':tf.FixedLenFeature([], tf.int64)})
image = tf.decode_raw(feats['feature'], tf.float32)
label = feats['label']
shape = tf.cast(feats['shape'], tf.int32)
return image, label, shape
def get_dataset(fname):
dataset = tf.data.TFRecordDataset(fname)
return dataset.map(parse_exmp) # use padded_batch method if padding needed
epochs = 16
batch_size = 50 # when batch_size can't be divided by nDatas, like 56,
# there will be a batch data with nums less than batch_size
# training dataset
nDatasTrain = 46750
dataset_train = get_dataset(train_f)
dataset_train = dataset_train.repeat(epochs).shuffle(1000).batch(batch_size) # make sure repeat is ahead batch
# this is different from dataset.shuffle(1000).batch(batch_size).repeat(epochs)
# the latter means that there will be a batch data with nums less than batch_size for each epoch
# if when batch_size can't be divided by nDatas.
nBatchs = nDatasTrain*epochs//batch_size
# evalation dataset
nDatasVal = 8250
dataset_val = get_dataset(val_f)
dataset_val = dataset_val.batch(nDatasVal).repeat(nBatchs//100*2)
# test dataset
nDatasTest = 10000
dataset_test = get_dataset(test_f)
dataset_test = dataset_test.batch(nDatasTest)
# make dataset iterator
iter_train = dataset_train.make_one_shot_iterator()
iter_val = dataset_val.make_one_shot_iterator()
iter_test = dataset_test.make_one_shot_iterator()
# make feedable iterator
handle = tf.placeholder(tf.string, shape=[])
iterator = tf.data.Iterator.from_string_handle(handle, \
dataset_train.output_types, dataset_train.output_shapes)
x, y_, _ = iterator.get_next()
train_op, loss, eval_op = model(x, y_)
init = tf.initialize_all_variables()
# summary
logdir = './logs/m4d2a'
def summary_op(datapart='train'):
tf.summary.scalar(datapart + '-loss', loss)
tf.summary.scalar(datapart + '-eval', eval_op)
return tf.summary.merge_all()
summary_op_train = summary_op()
summary_op_test = summary_op('val')
with tf.Session() as sess:
sess.run(init)
handle_train, handle_val, handle_test = sess.run(\
[x.string_handle() for x in [iter_train, iter_val, iter_test]])
_, cur_loss, cur_train_eval, summary = sess.run([train_op, loss, eval_op, summary_op_train], \
feed_dict={handle: handle_train, keep_prob: 0.5} )
cur_val_loss, cur_val_eval, summary = sess.run([loss, eval_op, summary_op_test], \
feed_dict={handle: handle_val, keep_prob: 1.0})
3.mnist实验
import tensorflow as tf
train_f, val_f, test_f = ['mnist-%s.tfrecord'%i for i in ['train', 'val', 'test']]
def parse_exmp(serial_exmp):
feats = tf.parse_single_example(serial_exmp, features={'feature':tf.FixedLenFeature([], tf.string),\
'label':tf.FixedLenFeature([10],tf.float32), 'shape':tf.FixedLenFeature([], tf.int64)})
image = tf.decode_raw(feats['feature'], tf.float32)
label = feats['label']
shape = tf.cast(feats['shape'], tf.int32)
return image, label, shape
def get_dataset(fname):
dataset = tf.data.TFRecordDataset(fname)
return dataset.map(parse_exmp) # use padded_batch method if padding needed
epochs = 16
batch_size = 50 # when batch_size can't be divided by nDatas, like 56,
# there will be a batch data with nums less than batch_size
# training dataset
nDatasTrain = 46750
dataset_train = get_dataset(train_f)
dataset_train = dataset_train.repeat(epochs).shuffle(1000).batch(batch_size) # make sure repeat is ahead batch
# this is different from dataset.shuffle(1000).batch(batch_size).repeat(epochs)
# the latter means that there will be a batch data with nums less than batch_size for each epoch
# if when batch_size can't be divided by nDatas.
nBatchs = nDatasTrain*epochs//batch_size
# evalation dataset
nDatasVal = 8250
dataset_val = get_dataset(val_f)
dataset_val = dataset_val.batch(nDatasVal).repeat(nBatchs//100*2)
# test dataset
nDatasTest = 10000
dataset_test = get_dataset(test_f)
dataset_test = dataset_test.batch(nDatasTest)
# make dataset iterator
iter_train = dataset_train.make_one_shot_iterator()
iter_val = dataset_val.make_one_shot_iterator()
iter_test = dataset_test.make_one_shot_iterator()
# make feedable iterator, i.e. iterator placeholder
handle = tf.placeholder(tf.string, shape=[])
iterator = tf.data.Iterator.from_string_handle(handle, \
dataset_train.output_types, dataset_train.output_shapes)
x, y_, _ = iterator.get_next()
# cnn
x_image = tf.reshape(x, [-1,28,28,1])
w_init = tf.truncated_normal_initializer(stddev=0.1, seed=9)
b_init = tf.constant_initializer(0.1)
cnn1 = tf.layers.conv2d(x_image, 32, (5,5), padding='same', activation=tf.nn.relu, \
kernel_initializer=w_init, bias_initializer=b_init)
mxpl1 = tf.layers.max_pooling2d(cnn1, 2, strides=2, padding='same')
cnn2 = tf.layers.conv2d(mxpl1, 64, (5,5), padding='same', activation=tf.nn.relu, \
kernel_initializer=w_init, bias_initializer=b_init)
mxpl2 = tf.layers.max_pooling2d(cnn2, 2, strides=2, padding='same')
mxpl2_flat = tf.reshape(mxpl2, [-1,7*7*64])
fc1 = tf.layers.dense(mxpl2_flat, 1024, activation=tf.nn.relu, \
kernel_initializer=w_init, bias_initializer=b_init)
keep_prob = tf.placeholder('float')
fc1_drop = tf.nn.dropout(fc1, keep_prob)
logits = tf.layers.dense(fc1_drop, 10, kernel_initializer=w_init, bias_initializer=b_init)
loss = tf.reduce_mean(tf.nn.softmax_cross_entropy_with_logits(logits=logits, labels=y_))
optmz = tf.train.AdamOptimizer(1e-4)
train_op = optmz.minimize(loss)
def get_eval_op(logits, labels):
corr_prd = tf.equal(tf.argmax(logits,1), tf.argmax(labels,1))
return tf.reduce_mean(tf.cast(corr_prd, 'float'))
eval_op = get_eval_op(logits, y_)
init = tf.initialize_all_variables()
# summary
logdir = './logs/m4d2a'
def summary_op(datapart='train'):
tf.summary.scalar(datapart + '-loss', loss)
tf.summary.scalar(datapart + '-eval', eval_op)
return tf.summary.merge_all()
summary_op_train = summary_op()
summary_op_val = summary_op('val')
# whether to restore or not
ckpts_dir = 'ckpts/'
ckpt_nm = 'cnn-ckpt'
saver = tf.train.Saver(max_to_keep=50) # defaults to save all variables, using dict {'x':x,...} to save specified ones.
restore_step = ''
start_step = 0
train_steps = nBatchs
best_loss = 1e6
best_step = 0
# import os
# os.environ["CUDA_VISIBLE_DEVICES"] = "0"
# config = tf.ConfigProto()
# config.gpu_options.per_process_gpu_memory_fraction = 0.9
# config.gpu_options.allow_growth=True # allocate when needed
# with tf.Session(config=config) as sess:
with tf.Session() as sess:
sess.run(init)
handle_train, handle_val, handle_test = sess.run(\
[x.string_handle() for x in [iter_train, iter_val, iter_test]])
if restore_step:
ckpt = tf.train.get_checkpoint_state(ckpts_dir)
if ckpt and ckpt.model_checkpoint_path: # ckpt.model_checkpoint_path means the latest ckpt
if restore_step == 'latest':
ckpt_f = tf.train.latest_checkpoint(ckpts_dir)
start_step = int(ckpt_f.split('-')[-1]) + 1
else:
ckpt_f = ckpts_dir+ckpt_nm+'-'+restore_step
print('loading wgt file: '+ ckpt_f)
saver.restore(sess, ckpt_f)
summary_wrt = tf.summary.FileWriter(logdir,sess.graph)
if restore_step in ['', 'latest']:
for i in range(start_step, train_steps):
_, cur_loss, cur_train_eval, summary = sess.run([train_op, loss, eval_op, summary_op_train], \
feed_dict={handle: handle_train, keep_prob: 0.5} )
# log to stdout and eval validation set
if i % 100 == 0 or i == train_steps-1:
saver.save(sess, ckpts_dir+ckpt_nm, global_step=i) # save variables
summary_wrt.add_summary(summary, global_step=i)
cur_val_loss, cur_val_eval, summary = sess.run([loss, eval_op, summary_op_val], \
feed_dict={handle: handle_val, keep_prob: 1.0})
if cur_val_loss < best_loss:
best_loss = cur_val_loss
best_step = i
summary_wrt.add_summary(summary, global_step=i)
print 'step %5d: loss %.5f, acc %.5f --- loss val %0.5f, acc val %.5f'%(i, \
cur_loss, cur_train_eval, cur_val_loss, cur_val_eval)
# sess.run(init_train)
with open(ckpts_dir+'best.step','w') as f:
f.write('best step is %d\n'%best_step)
print 'best step is %d'%best_step
# eval test set
test_loss, test_eval = sess.run([loss, eval_op], feed_dict={handle: handle_test, keep_prob: 1.0})
print 'eval test: loss %.5f, acc %.5f'%(test_loss, test_eval)
实验结果：
以上这篇tensorflow入门:tfrecord 和tf.data.TFRecordDataset的使用就是小编分享给大家的全部内容了，希望能给大家一个参考，也希望大家多多支持脚本之家。
相关文章
下面小编就为大家分享一篇DataFrame中去除指定列为空的行方法，具有很好的参考价值，希望对大家有所帮助。一起跟随小编过来看看吧2018-04-04
Python提供了多个GUI库,使开发人员能够轻松创建各种交互式界面,这篇文章主要给大家介绍了关于python中tkinter实现GUI程序的三个实例教程,文中通过代码介绍的非常详细,需要的朋友可以参考下2024-05-05
详解向scrapy中的spider传递参数的几种方法(2种)
这篇文章主要介绍了详解向scrapy中的spider传递参数的几种方法,文中通过示例代码介绍的非常详细，对大家的学习或者工作具有一定的参考学习价值，需要的朋友们下面随着小编来一起学习学习吧2020-09-09
pytorch lstm gru rnn 得到每个state输出的操作
这篇文章主要介绍了pytorch lstm gru rnn 得到每个state输出的操作，具有很好的参考价值，希望对大家有所帮助。如有错误或未考虑完全的地方，望不吝赐教2021-05-05
pytorch中model.train()和model.eval()用法及说明
在PyTorch中,model.train()用于启用BatchNormalization和Dropout,保证模型在训练阶段能够有效地利用这些层的特性,而model.eval()则是用于测试阶段,确保BatchNormalization和Dropout不会影响测试结果,保持模型的稳定性2024-09-09
解决使用python print打印函数返回值多一个None的问题
这篇文章主要介绍了解决使用python print打印函数返回值多一个None的问题，具有很好的参考价值，希望对大家有所帮助。一起跟随小编过来看看吧2020-04-04
TCP协议适用于对效率要求相对较低而准确性要求很高的场合，下面通过本文给大家介绍基于Python 使用 TCP 实现智能聊天机器人,需要的朋友可以参考下2022-05-05
生成器指的是生成器对象,可以由生成器表达式得到,也可以使用yield关键字得到一个生成器函数,调用这个函数得到一个生成器对象,下面这篇文章主要给大家介绍了关于Python中生成器的相关资料,需要的朋友可以参考下2022-04-04
这篇文章主要介绍了python tkinter组件摆放方式详解,文中通过示例代码介绍的非常详细，对大家的学习或者工作具有一定的参考学习价值,需要的朋友可以参考下2019-09-09
这篇文章主要介绍了python文件与路径操作神器 pathlib，pathlib中封装了PurePath和Path类，前者用于处理路径风格的字符串；后者是前者的子类，可直接处理路径，下文关于更多的pathlib相关内容，需要的小伙伴可以参考一下2022-04-04
最新评论