基于Python数据结构之递归与回溯搜索
目录
1. 递归函数与回溯深搜的基础知识
2. 求子集 (LeetCode 78)
3. 求子集2 (LeetCode 90)
4. 组合数之和(LeetCode 39,40)
5. 生成括号(LeetCode 22)
6. N皇后(LeetCode 51,52)
7. 火柴棍摆正方形(LeetCode 473)
1. 递归函数与回溯深搜的基础知识
递归是指在函数内部调用自身本身的方法。能采用递归描述的算法通常有这样的特征:为求解规模为N的问题,设法将它分解成规模较小的问题,然后从这些小问题的解方便地构造出大问题的解,并且这些规模较小的问题也能采用同样的分解和综合方法,分解成规模更小的问题,并从这些更小问题的解构造出规模较大问题的解。特别地,当规模N=1时,能直接得解。
回溯法(探索与回溯法)是一种选优搜索法,又称为试探法,按选优条件向前搜索,以达到目标。但当探索到某一步时,发现原先选择并不优或达不到目标,就退回一步重新选择,这种走不通就退回再走的技术为回溯法,而满足回溯条件的某个状态的点称为“回溯点”。
2. 求子集 (LeetCode 78 Subsets)
2.1题目
Given a set of distinct integers, nums, return all possible subsets (the power set).
Note: The solution set must not contain duplicate subsets.
For example,
If nums = [1,2,3], a solution is:
[
[3],
[1],
[2],
[1,2,3],
[1,3],
[2,3],
[1,2],
[]
]
2.2思路
初始化,[ ]的子集为[ [ ] ]
nums[ : n]的子集为所有nums[ : n-1]的子集 加上所有nums[ : n-1]的子集+元素nums[n-1]
2.3代码
class Solution(object): def subsets(self, nums): """ :type nums: List[int] :rtype: List[List[int]] """ size = len(nums) return self.solve(nums, size) def solve(self, nums, n): if n == 0: return [[]] temp = self.solve(nums[:n-1], n-1) ans = temp[:] for i in temp: ans.append(i + [nums[n-1]]) return ans
3. 求子集2 (LeetCode 90 Subsets II)
3.1题目
Given a collection of integers that might contain duplicates, nums, return all possible subsets (the power set).
Note: The solution set must not contain duplicate subsets.
For example,
If nums = [1,2,2], a solution is:
[
[2],
[1],
[1,2,2],
[2,2],
[1,2],
[]
]
3.2思路
在上一题思路的基础上,当nums[i]=nums[i-1]时,添加子集时只需在上一步增加的子集基础上进行添加nums[i],而不需要对所有子集进行添加nums[i]。故在递归返回结果时,返回两个结果,一个是所有子集,还有一个是该步骤中添加的子集的集合。
3.3代码
class Solution(object): def subsetsWithDup(self, nums): """ :type nums: List[int] :rtype: List[List[int]] """ nums.sort() size = len(nums) return self.solve(nums, size)[0] def solve(self, nums, n): if n == 0: return [[]],[[]] if n == 1: return [[],[nums[n-1]]],[[nums[n-1]]] temp = self.solve(nums[:n-1], n-1) ans = temp[0][:] l = len(ans) if nums[n-1] == nums[n-2]: for i in temp[1]: ans.append(i + [nums[n-1]]) else: for i in temp[0]: ans.append(i + [nums[n-1]]) return ans,ans[l:]
4. 组合数之和(LeetCode 39,40 )
4.1题目
LeetCode 39 Combination Sum
Given a set of candidate numbers (C) (without duplicates) and a target number (T), find all unique combinations in C where the candidate numbers sums to T.
The same repeated number may be chosen from C unlimited number of times.
Note:
All numbers (including target) will be positive integers.
The solution set must not contain duplicate combinations.
For example, given candidate set [2, 3, 6, 7] and target 7,
A solution set is:
[
[7],
[2, 2, 3]
]
LeetCode 40 Combination Sum II
Given a collection of candidate numbers (C) and a target number (T), find all unique combinations in C where the candidate numbers sums to T.
Each number in C may only be used once in the combination.
Note:
All numbers (including target) will be positive integers.
The solution set must not contain duplicate combinations.
For example, given candidate set [10, 1, 2, 7, 6, 1, 5] and target 8,
A solution set is:
[
[1, 7],
[1, 2, 5],
[2, 6],
[1, 1, 6]
]
4.2思路
LeetCode 39 Combination Sum
(1)对给定的数字集合进行排序
(2)target=T,从数组中找一个数n,target= T-n,如果target= 0,则寻找成功添加结果,如果taget比候选数字中的最小值还小,则寻找失败,不添加
(3)注意:按从小到大的顺序进行查找,如果某数已找到,则在找下一个时,不包括该数
LeetCode 40 Combination Sum II
该题与上一题相比,区别在于,给定的集合列表中数字可能重复,目标集合中的数字只能使用给定集合中的数字,并且每个数字只能使用一次。注意,由于存在重复的数字,故需要保证结果中的路径集合没有重复。所以当出现candidates[i]==candidates[i-1],跳过。
4.3代码
LeetCode 39 Combination Sum
class Solution(object): def combinationSum(self, candidates, target): """ :type candidates: List[int] :type target: int :rtype: List[List[int]] """ candidates.sort() self.ans = [] self.solve(candidates, target, 0 ,[]) return self.ans def solve(self, candidates, target, start, path): if target == 0: self.ans.append(path) return if target < 0: return size = len(candidates) for i in range(start, size): if candidates[i] > target: return self.solve(candidates, target - candidates[i], i, path + [candidates[i]])
LeetCode 40 Combination Sum II
class Solution(object): def combinationSum2(self, candidates, target): """ :type candidates: List[int] :type target: int :rtype: List[List[int]] """ candidates.sort() self.ans = [] self.solve(candidates, target, 0, []) return self.ans def solve(self, candidates, target, start, path): if target == 0: self.ans.append(path) return if target < 0: return size = len(candidates) for i in range(start, size): if i != start and candidates[i] == candidates[i-1]: continue self.solve(candidates, target - candidates[i], i + 1, path + [candidates[i]])
5. 生成括号(LeetCode 22 Generate Parentheses)
5.1题目
Given n pairs of parentheses, write a function to generate all combinations of well-formed parentheses.
For example, given n = 3, a solution set is:
[
“((()))”,
“(()())”,
“(())()”,
“()(())”,
“()()()”
]
5.2思路
在任意位置,左括号的个数要大于等于右括号的个数,如果左括号的个数有剩余,则+'(‘,递归,如果右括号有剩余,且小于左括号的的个数,则 +‘)‘,最后左右括号都不剩则排列结束。
5.3代码
class Solution(object): def generateParenthesis(self, n): """ :type n: int :rtype: List[str] """ self.res = [] self.generateParenthesisIter('',n, n) return self.res def generateParenthesisIter(self, mstr, r, l): if r == 0 and l ==0: self.res.append(mstr) if l > 0: self.generateParenthesisIter(mstr+'(', r, l-1) if r > 0 and r > l: self.generateParenthesisIter(mstr+')', r-1, l)
6. N皇后(LeetCode 51 ,52)
6.1题目
LeetCode 51 N-Queens
The n-queens puzzle is the problem of placing n queens on an n×n chessboard such that no two queens attack each other.
Given an integer n, return all distinct solutions to the n-queens puzzle.
Each solution contains a distinct board configuration of the n-queens' placement, where ‘Q' and ‘.' both indicate a queen and an empty space respectively.
For example,
There exist two distinct solutions to the 4-queens puzzle:
[
[“.Q..”, // Solution 1
“…Q”,
“Q…”,
“..Q.”],[“..Q.”, // Solution 2
“Q…”,
“…Q”,
“.Q..”]
]
LeetCode 52 N-Queens II
Follow up for N-Queens problem.
Now, instead outputting board configurations, return the total number of distinct solutions.
6.2思路
LeetCode 51 N-Queens
n*n的板上放置n个皇后,n个皇后不能发生攻击,即行/列/斜没有其他皇后,要求给出所有解决方案。每次在棋盘上的当前位置放置一个皇后,当不与前面行的皇后发生冲突时,则可以递归处理下面行的皇后。因为有n行n列,n个皇后,故每行可以放一个皇后,每一列也只能放置一个皇后。通过检查第k个皇后能否被放置在第j列进行判断(不与其他皇后在同行,同列,同斜行)。使用一个长度为n的列表记录第k行皇后放置的列位置。
LeetCode 52 N-Queens II
和上一题思路一样,返回结果的长度即可
6.3代码
LeetCode 51 N-Queens
class Solution(object): def solveNQueens(self, n): """ :type n: int :rtype: List[List[str]] """ self.ans = [] self.board = [-1 for i in range(n)] self.dfs(0, [], n) return self.ans def isQueen(self, krow, jcolumn): for i in range(krow): if self.board[i] == jcolumn or abs(krow-i) == abs(self.board[i] - jcolumn): return False return True def dfs(self, krow, rowlist, n): if krow == n: self.ans.append(rowlist) for i in range(n): if self.isQueen(krow,i): self.board[krow] = i self.dfs(krow + 1,rowlist + ['.' * i + 'Q' + '.' * (n-i-1)],n)
LeetCode 52 N-Queens II
class Solution(object): def totalNQueens(self, n): """ :type n: int :rtype: int """ self.ans = [] self.board = [-1 for i in range(n)] self.dfs(0, [], n) return len(self.ans) def isQueen(self, krow, jcolumn): for i in range(krow): if self.board[i] == jcolumn or abs(krow-i) == abs(self.board[i] - jcolumn): return False return True def dfs(self, krow, rowlist, n): if krow == n: self.ans.append(rowlist) for i in range(n): if self.isQueen(krow,i): self.board[krow] = i self.dfs(krow + 1,rowlist + ['.' * i + 'Q' + '.' * (n-i-1)],n)
7. 火柴棍摆正方形(LeetCode 473 Matchsticks to Square)
7.1题目
Remember the story of Little Match Girl? By now, you know exactly what matchsticks the little match girl has, please find out a way you can make one square by using up all those matchsticks. You should not break any stick, but you can link them up, and each matchstick must be used exactly one time.
Your input will be several matchsticks the girl has, represented with their stick length. Your output will either be true or false, to represent whether you could make one square using all the matchsticks the little match girl has.
Example 1:
Input: [1,1,2,2,2]
Output: trueExplanation: You can form a square with length 2, one side of the square came two sticks with length 1.
Example 2:
Input: [3,3,3,3,4]
Output: falseExplanation: You cannot find a way to form a square with all the matchsticks.
7.2思路
根据火柴棒的总长度,求正方形的变长,若变长不为整数,则直接判断为False。
先将nums按从大到小的顺序排序,used为和nums等长的列表,用于记录第i位的元素是否被用过。
使用递归判断从第i位元素起始,能否找到这样的组合满足其长度之和等于正方形的边长。
(1)若满足初始条件,则返回结果(True or False)
(2)若不满足条件,则进行递归,在剩下的元素中进行选择,看有没有满足情况的,如果没有满足情况的,used对应位置改为False,结果返回False
(3)对nums中的每个元素进行遍历,看能否满足nums中的每个火柴棒都能找到对应边的组合,其长度和等于正方形边长。
7.3代码
class Solution(object): def makesquare(self, nums): """ :type nums: List[int] :rtype: bool """ total = sum(nums) if total%4 != 0 or len(nums)<4: return False size = total/4 nums.sort(reverse=True) used = [False]*len(nums) def dfs(i, expect): if i >= len(nums): return expect%size == 0 if used[i]: return dfs(i+1, expect) used[i] = True if nums[i] == expect: return True if nums[i] < expect: expect -= nums[i] available = [j for j in range(i+1, len(nums)) if not used[j]] for x in available: if dfs(x, expect): return True used[i] = False return False for i in range(len(nums)): if not dfs(i, size): return False return True
以上这篇基于Python数据结构之递归与回溯搜索就是小编分享给大家的全部内容了,希望能给大家一个参考,也希望大家多多支持脚本之家。
相关文章
Python实现读取目录所有文件的文件名并保存到txt文件代码
这篇文章主要介绍了Python实现读取目录所有文件的文件名并保存到txt文件代码,本文分别使用os.listdir和os.walk实现给出两段实现代码,需要的朋友可以参考下2014-11-11使用with torch.no_grad():显著减少测试时显存占用
这篇文章主要介绍了使用with torch.no_grad():显著减少测试时显存占用问题,具有很好的参考价值,希望对大家有所帮助,如有错误或未考虑完全的地方,望不吝赐教2023-08-08
最新评论