Python显示进度条的方法
更新时间：2014年09月20日 15:35:50 投稿：shichen2014
这篇文章主要介绍了Python显示进度条的方法,以实例的形式进行了详细的分析,是一个非常实用的技巧,需要的朋友可以参考下
本文实例讲述了Python显示进度条的方法，是Python程序设计中非常实用的技巧。分享给大家供大家参考。具体方法如下：
首先，进度条和一般的print区别在哪里呢？
答案就是print会输出一个\n，也就是换行符，这样光标移动到了下一行行首，接着输出，之前已经通过stdout输出的东西依旧保留，而且保证我们在下面看到最新的输出结果。
进度条不然，我们必须再原地输出才能保证他是一个进度条，否则换行了怎么还叫进度条？
最简单的办法就是，再输出完毕后，把光标移动到行首，继续在那里输出更长的进度条即可实现，新的更长的进度条把旧的短覆盖，就形成了动画效果。
可以想到那个转义符了吧，那就是 \r。
转义符\r就可以把光标移动到行首而不换行，转义符\n就把光标移动到行首并且换行。
在python中，输出stdout(标准输出)可以使用sys.stdout.write
例如：
#!/usr/bin/env python
# -*- coding=utf-8 -*-
#Using GPL v2
#Author: ihipop@gmail.com
##2010-10-27 22:07
"""
Usage:
Just A Template
"""
from __future__ import division
import sys,time
j = '#'
if __name__ == '__main__':
for i in range(1,61):
j += '#'
sys.stdout.write(str(int((i/60)*100))+'% ||'+j+'->'+"\r")
sys.stdout.flush()
time.sleep(0.5)
print
第二种思路是用转义符\b
转义符\b是退格键，也就是说把输出的光标往回退格子，这样就可以不用+=了，例如：
#!/usr/bin/env python
# -*- coding=utf-8 -*-
#Using GPL v2
#Author: ihipop@gmail.com
#2010-10-27 22:07
"""
Usage:
Just A Template
"""
from __future__ import division
import sys,time
if __name__ == '__main__':
for i in range(1,61):
sys.stdout.write('#'+'->'+"\b\b")
sys.stdout.flush()
time.sleep(0.5)
print
光标回退2格，写个#再回退，再写，达到增长的目的了
不过写这么多似乎是废话，在耳边常常听到一句话：那就是不要重复造轮子。实际上python有丰富发lib帮你实现这个东西，你完全可以把心思放在逻辑开发上而不用注意这些小细节
下面要介绍的就是这个类“progressbar”(http://code.google.com/p/python-progressbar/)，使用easy_install可以方便的安装这个类库，其实就一个文件，拿过来放到文件同一个目录下面也直接可以import过来
如下图所示：
下面就是基本使用举例：
#!/usr/bin/env python
# -*- coding=utf-8 -*-
#Using GPL v2
#Author: ihipop@gmail.com
#2010-10-27 22:53
"""
Usage:
Just A Template
"""
from __future__ import division
import sys,time
from progressbar import *
total = 1000
#基本用法
progress = ProgressBar()
for i in progress(range(total)):
time.sleep(0.01)
pbar = ProgressBar().start()
for i in range(1,1000):
pbar.update(int((i/(total-1))*100))
time.sleep(0.01)
pbar.finish()
#高级用法
widgets = ['Progress: ', Percentage(), ' ', Bar(marker=RotatingMarker('>-=')),
' ', ETA(), ' ', FileTransferSpeed()]
pbar = ProgressBar(widgets=widgets, maxval=10000000).start()
for i in range(1000000):
# do something
pbar.update(10*i+1)
time.sleep(0.0001)
pbar.finish()
官方示例:http://code.google.com/p/python-progressbar/source/browse/progressbar/examples.py
#coding:utf-8
import sys
import time
from progressbar import AnimatedMarker, Bar, BouncingBar, Counter, ETA, \
FileTransferSpeed, FormatLabel, Percentage, \
ProgressBar, ReverseBar, RotatingMarker, \
SimpleProgress, Timer
examples = []
def example(fn):
try: name = 'Example %d' % int(fn.__name__[7:])
except: name = fn.__name__
def wrapped():
try:
sys.stdout.write('Running: %s\n' % name)
fn()
sys.stdout.write('\n')
except KeyboardInterrupt:
sys.stdout.write('\nSkipping example.\n\n')
examples.append(wrapped)
return wrapped
@example
def example0():
pbar = ProgressBar(widgets=[Percentage(), Bar()], maxval=300).start()
for i in range(300):
time.sleep(0.01)
pbar.update(i+1)
pbar.finish()
@example
def example1():
widgets = ['Test: ', Percentage(), ' ', Bar(marker=RotatingMarker()),
' ', ETA(), ' ', FileTransferSpeed()]
pbar = ProgressBar(widgets=widgets, maxval=10000000).start()
for i in range(1000000):
# do something
pbar.update(10*i+1)
pbar.finish()
@example
def example2():
class CrazyFileTransferSpeed(FileTransferSpeed):
"""It's bigger between 45 and 80 percent."""
def update(self, pbar):
if 45 < pbar.percentage() < 80:
return 'Bigger Now ' + FileTransferSpeed.update(self,pbar)
else:
return FileTransferSpeed.update(self,pbar)
widgets = [CrazyFileTransferSpeed(),' <<<', Bar(), '>>> ',
Percentage(),' ', ETA()]
pbar = ProgressBar(widgets=widgets, maxval=10000000)
# maybe do something
pbar.start()
for i in range(2000000):
# do something
pbar.update(5*i+1)
pbar.finish()
@example
def example3():
widgets = [Bar('>'), ' ', ETA(), ' ', ReverseBar('<')]
pbar = ProgressBar(widgets=widgets, maxval=10000000).start()
for i in range(1000000):
# do something
pbar.update(10*i+1)
pbar.finish()
@example
def example4():
widgets = ['Test: ', Percentage(), ' ',
Bar(marker='0',left='[',right=']'),
' ', ETA(), ' ', FileTransferSpeed()]
pbar = ProgressBar(widgets=widgets, maxval=500)
pbar.start()
for i in range(100,500+1,50):
time.sleep(0.2)
pbar.update(i)
pbar.finish()
@example
def example5():
pbar = ProgressBar(widgets=[SimpleProgress()], maxval=17).start()
for i in range(17):
time.sleep(0.2)
pbar.update(i + 1)
pbar.finish()
@example
def example6():
pbar = ProgressBar().start()
for i in range(100):
time.sleep(0.01)
pbar.update(i + 1)
pbar.finish()
@example
def example7():
pbar = ProgressBar() # Progressbar can guess maxval automatically.
for i in pbar(range(80)):
time.sleep(0.01)
@example
def example8():
pbar = ProgressBar(maxval=80) # Progressbar can't guess maxval.
for i in pbar((i for i in range(80))):
time.sleep(0.01)
@example
def example9():
pbar = ProgressBar(widgets=['Working: ', AnimatedMarker()])
for i in pbar((i for i in range(50))):
time.sleep(.08)
@example
def example10():
widgets = ['Processed: ', Counter(), ' lines (', Timer(), ')']
pbar = ProgressBar(widgets=widgets)
for i in pbar((i for i in range(150))):
time.sleep(0.1)
@example
def example11():
widgets = [FormatLabel('Processed: %(value)d lines (in: %(elapsed)s)')]
pbar = ProgressBar(widgets=widgets)
for i in pbar((i for i in range(150))):
time.sleep(0.1)
@example
def example12():
widgets = ['Balloon: ', AnimatedMarker(markers='.oO@* ')]
pbar = ProgressBar(widgets=widgets)
for i in pbar((i for i in range(24))):
time.sleep(0.3)
@example
def example13():
# You may need python 3.x to see this correctly
try:
widgets = ['Arrows: ', AnimatedMarker(markers='←↖↑↗→↘↓↙')]
pbar = ProgressBar(widgets=widgets)
for i in pbar((i for i in range(24))):
time.sleep(0.3)
except UnicodeError: sys.stdout.write('Unicode error: skipping example')
@example
def example14():
# You may need python 3.x to see this correctly
try:
widgets = ['Arrows: ', AnimatedMarker(markers='◢◣◤◥')]
pbar = ProgressBar(widgets=widgets)
for i in pbar((i for i in range(24))):
time.sleep(0.3)
except UnicodeError: sys.stdout.write('Unicode error: skipping example')
@example
def example15():
# You may need python 3.x to see this correctly
try:
widgets = ['Wheels: ', AnimatedMarker(markers='◐◓◑◒')]
pbar = ProgressBar(widgets=widgets)
for i in pbar((i for i in range(24))):
time.sleep(0.3)
except UnicodeError: sys.stdout.write('Unicode error: skipping example')
@example
def example16():
widgets = [FormatLabel('Bouncer: value %(value)d - '), BouncingBar()]
pbar = ProgressBar(widgets=widgets)
for i in pbar((i for i in range(180))):
time.sleep(0.05)
@example
def example17():
widgets = [FormatLabel('Animated Bouncer: value %(value)d - '),
BouncingBar(marker=RotatingMarker())]
pbar = ProgressBar(widgets=widgets)
for i in pbar((i for i in range(180))):
time.sleep(0.05)
@example
def example18():
widgets = [Percentage(),
' ', Bar(),
' ', ETA(),
' ', AdaptiveETA()]
pbar = ProgressBar(widgets=widgets, maxval=500)
pbar.start()
for i in range(500):
time.sleep(0.01 + (i < 100) * 0.01 + (i > 400) * 0.9)
pbar.update(i + 1)
pbar.finish()
@example
def example19():
pbar = ProgressBar()
for i in pbar([]):
pass
pbar.finish()
try:
for example in examples:
example()
except KeyboardInterrupt:
sys.stdout('\nQuitting examples.\n')
Progress Bar 使用例子
再发一个类：
#!/usr/bin/env python
# -*- coding=utf-8 -*-
#Using GPL v2
#Author: ihipop@gmail.com
#2010-10-30 13:59
"""
Usage:
Just A Template
"""
class progressbarClass:
def __init__(self, finalcount, progresschar=None):
import sys
self.finalcount=finalcount
self.blockcount=0
#
# See if caller passed me a character to use on the
# progress bar (like "*"). If not use the block
# character that makes it look like a real progress
# bar.
#
if not progresschar: self.block=chr(178)
else: self.block=progresschar
#
# Get pointer to sys.stdout so I can use the write/flush
# methods to display the progress bar.
#
self.f=sys.stdout
#
# If the final count is zero, don't start the progress gauge
#
if not self.finalcount : return
self.f.write('\n------------------- % Progress -------------------\n')
return
def progress(self, count):
#
# Make sure I don't try to go off the end (e.g. >100%)
#
count=min(count, self.finalcount)
#
# If finalcount is zero, I'm done
#
if self.finalcount:
percentcomplete=int(round(100*count/self.finalcount))
if percentcomplete < 1: percentcomplete=1
else:
percentcomplete=100
#print "percentcomplete=",percentcomplete
blockcount=int(percentcomplete/2)
#print "blockcount=",blockcount
if blockcount > self.blockcount:
for i in range(self.blockcount,blockcount):
self.f.write(self.block)
self.f.flush()
if percentcomplete == 100: self.f.write("\n")
self.blockcount=blockcount
return
if __name__ == "__main__":
from time import sleep
pb=progressbarClass(8,"*")
count=0
while count<9:
count+=1
pb.progress(count)
sleep(0.2)
另外，python cookbook中11.1节也提供了一个不错的进度条类，代码如下：
import sys
class progressbar(object):
def __init__(self, finalcount, block_char='.'):
self.finalcount = finalcount
self.blockcount = 0
self.block = block_char
self.f = sys.stdout
if not self.finalcount: return
self.f.write('\n------------------ % Progress -------------------1\n')
self.f.write(' 1 2 3 4 5 6 7 8 9 0\n')
self.f.write('----0----0----0----0----0----0----0----0----0----0\n')
def progress(self, count):
count = min(count, self.finalcount)
if self.finalcount:
percentcomplete = int(round(100.0*count/self.finalcount))
if percentcomplete < 1: percentcomplete = 1
else:
percentcomplete=100
blockcount = int(percentcomplete//2)
if blockcount <= self.blockcount:
return
for i in range(self.blockcount, blockcount):
self.f.write(self.block)
self.f.flush()
self.blockcount = blockcount
if percentcomplete == 100:
self.f.write("\n")
if __name__ == "__main__":
from time import sleep
pb = progressbar(8, "*")
for count in range(1, 9):
pb.progress(count)
sleep(0.2)
pb = progressbar(100)
pb.progress(20)
sleep(0.3)
pb.progress(47)
sleep(0.3)
pb.progress(90)
sleep(0.3)
pb.progress(100)
print "testing 1:"
pb = progressbar(1)
pb.progress(1)
运行结果如下图所示：
希望本文所述对大家Python程序设计的学习有所帮助。
相关文章
这篇文章主要介绍了python删除过期文件的方法,涉及Python日期与文件的相关操作技巧,需要的朋友可以参考下2015-05-05
本文通过具体的代码示例为大家解释了如何高效地使用logging模块进行日志记录，以及如何避免常见的陷阱，希望可以帮助大家更好地掌握这个强大的工具2023-07-07
Python之数据序列化（json、pickle、shelve）详解
这篇文章主要介绍了Python之数据序列化（json、pickle、shelve）详解,文中通过示例代码介绍的非常详细，对大家的学习或者工作具有一定的参考学习价值,需要的朋友可以参考下2019-08-08
倒排索引（英语：Inverted index），也常被称为反向索引、置入档案或反向档案，是一种索引方法，被用来存储在全文搜索下某个单词在一个文档或者一组文档中的存储位置的映射。这篇文章主要介绍了Python倒排索引之查找包含某主题或单词的文件,需要的朋友可以参考下2019-11-11
re.findall() 函数是 python 中正则表达式模块（re）的一个重要函数,它可以根据正则表达式搜索字符串,并返回匹配的字符串列表,这篇文章给大家介绍了python中re.findall() 的使用案例,感兴趣的朋友跟随小编一起看看吧2023-09-09
这篇文章主要介绍了Python 用户输入和while循环的操作，具有很好的参考价值，希望对大家有所帮助。如有错误或未考虑完全的地方，望不吝赐教2021-05-05
本文主要介绍了Python去除PDF水印的实现示例，思路很简单，代码也很简洁。具有一定的参考价值，感兴趣的可以了解一下2021-11-11
本文主要介绍了PyTorch中apex安装方式和避免踩坑，文中通过示例代码介绍的非常详细，对大家的学习或者工作具有一定的参考学习价值，需要的朋友们下面随着小编来一起学习学习吧2022-07-07
这篇文章主要介绍了Python中创建表格，在python中使用tabulate库来创建表格，并针对输出形式进行不断改进来美化输出效果，并给出了代码示例。需要的小伙伴可以参考一下2022-02-02
使用Python自动化Microsoft Excel和Word的操作方法
这篇文章主要介绍了使用Python自动化Microsoft Excel和Word,本文给大家介绍的非常详细，对大家的学习或工作具有一定的参考借鉴价值，需要的朋友可以参考下2021-04-04
最新评论