设置高级NTFS权限的工具 XCACLS.vbs
更新时间：2007年03月11日 00:00:00 作者：
Xcacls.vbs 只与 Microsoft Windows 2000、Microsoft Windows XP 和 Microsoft Windows Server 2003 兼容。Microsoft 不支持 Xcacls.vbs
http://support.microsoft.com/kb/825751
Microsoft 以 Microsoft Visual Basic 脚本 (Xcacls.vbs) 的形式提供了 Extended Change Access Control List（扩展更改访问控制列表）工具 (Xcacls.exe) 的更新版本。本文分步介绍如何使用 Xcacls.vbs 脚本修改和查看文件或文件夹的 NTFS 文件系统权限。 可以从命令行使用 Xcacls.vbs 设置所有可在 Microsoft Windows 资源管理器中访问的文件系统安全选项。Xcacls.vbs 可显示和修改文件的访问控制列表 (ACL)。
注意：Xcacls.vbs 只与 Microsoft Windows 2000、Microsoft Windows XP 和 Microsoft Windows Server 2003 兼容。Microsoft 不支持 Xcacls.vbs。
回到顶端
设置和使用 Xcacls.vbs
要设置和使用 Xcacls.vbs，请按照下列步骤操作：
从以下 Microsoft 网站获得 Xcacls.vbs 的最新版本：
http://download.microsoft.com/download/f/7/8/f786aaf3-a37b-45ab-b0a2-8c8c18bbf483/XCacls_Installer.exe (http://download.microsoft.com/download/f/7/8/f786aaf3-a37b-45ab-b0a2-8c8c18bbf483/xcacls_installer.exe)
双击“Xcacls_Installer.exe”。当提示您提供放置提取文件的位置时，请指定一个位于计算机的搜索路径设置中的文件夹（如 C:\Windows）。
将默认脚本引擎从 Wscript 更改为 Cscript。（Xcacls.vbs 脚本最适合在 Cscript 下运行。）为此，请在命令提示符下键入以下内容，然后按 Enter：
cscript.exe /h:cscript
注意：将默认脚本引擎更改为 Cscript 只影响脚本向屏幕写入的方式。Wscript 根据“确定”对话框分别写入每一行。Cscript 将每一行写入命令窗口。如果您不想更改默认脚本引擎，则必须使用以下命令运行脚本
cscript.exe xcacls.vbs
但是，如果将默认脚本更改为 Cscript，则可以使用以下命令运行该脚本：
xcacls.vbs
.
要查看 Xcacls.vbs 的命令语法，请在命令提示符处键入下面的命令：
xcacls.vbs /?
Xcacls.vbs 命令的语法
下面 xcacls.vbs /? 命令的输出描述了 Xcacls.vbs 命令的语法：
Usage:
XCACLS filename [/E] [/G user:perm;spec] [...] [/R user [...]]
[/F] [/S] [/T]
[/P user:perm;spec [...]] [/D user:perm;spec] [...]
[/O user] [/I ENABLE/COPY/REMOVE] [/N
[/L filename] [/Q] [/DEBUG]
filename [Required] If used alone, it displays ACLs.
(Filename can be a filename, directory name or
wildcard characters and can include the whole
path. If path is missing, it is assumed to be
under the current directory.)
Notes:
- Put filename in quotes if it has spaces or
special characters such as &, $, #, etc.
- If filename is a directory, all files and
subdirectories under it will NOT be changed
unless the /F or S is present.
/F [Used with Directory or Wildcard] This will change all
files under the inputted directory but will NOT
traverse subdirectories unless /T is also present.
If filename is a directory, and /F is not used, no
files will be touched.
/S [Used with Directory or Wildcard] This will change all
subfolders under the inputted directory but will NOT
traverse subdirectories unless /T is also present.
If filename is a directory, and /S is not used, no
subdirectories will be touched.
/T [Used only with a Directory] Traverses each
subdirectory and makes the same changes.
This switch will traverse directories only if the
filename is a directory or is using wildcard characters.
/E Edit ACL instead of replacing it.
/G user:GUI Grant security permissions similar to Windows GUI
standard (non-advanced) choices.
/G user:Perm;Spec Grant specified user access rights.
(/G adds to existing rights for user)
User: If User has spaces in it, enclose it in quotes.
If User contains #machine#, it will replace
#machine# with the actual machine name if it is a
non-domain controller, and replace it with the
actual domain name if it is a domain controller.
New to 3.0: User can be a string representing
the actual SID, but MUST be lead by SID#
Example: SID#S-1-5-21-2127521184-160...
(SID string shown has been shortened)
(If any user has SID# then globally all
matches must match the SID (not name)
so if your intention is to apply changes
to all accounts that match Domain\User
then do not specify SID# as one of the
users.)
GUI: Is for standard rights and can be:
Permissions...
F Full control
M Modify
X read and eXecute
L List folder contents
R Read
W Write
Note: If a ; is present, this will be considered
a Perm;Spec parameter pair.
Perm: Is for "Files Only" and can be:
Permissions...
F Full control
M Modify
X read and eXecute
R Read
W Write
Advanced...
D Take Ownership
C Change Permissions
B Read Permissions
A Delete
9 Write Attributes
8 Read Attributes
7 Delete Subfolders and Files
6 Traverse Folder / Execute File
5 Write Extended Attributes
4 Read Extended Attributes
3 Create Folders / Append Data
2 Create Files / Write Data
1 List Folder / Read Data
Spec is for "Folder and Subfolders only" and has the
same choices as Perm.
/R user Revoke specified user's access rights.
(Will remove any Allowed or Denied ACL's for user.)
/P user:GUI Replace security permissions similar to standard choices.
/P user:perm;spec Replace specified user's access rights.
For access right specification see /G option.
(/P behaves like /G if there are no rights set for user.)
/D user:GUI Deny security permissions similar to standard choices.
/D user:perm;spec Deny specified user access rights.
For access right specification see /G option.
(/D adds to existing rights for user.)
/O user Change the Ownership to this user or group.
/I switch Inheritance flag. If omitted, the default is to not touch
Inherited ACL's. Switch can be:
ENABLE - This will turn on the Inheritance flag if
it is not on already.
COPY - This will turn off the Inheritance flag and
copy the Inherited ACL's
into Effective ACL's.
REMOVE - This will turn off the Inheritance flag and
will not copy the Inherited
ACL's. This is the opposite of ENABLE.
If switch is not present, /I will be ignored and
Inherited ACL's will remain untouched.
/L filename Filename for Logging. This can include a path name
if the file is not under the current directory.
File will be appended to, or created if it does not
exit. Must be Text file if it exists or error will occur.
If filename is omitted, the default name of XCACLS will
be used.
/Q Turn on Quiet mode. By default, it is off.
If it is turned on, there will be no display to the screen.
/DEBUG Turn on Debug mode. By default, it is off.
If it is turned on, there will be more information
displayed and/or logged. Information will show
Sub/Function Enter and Exit as well as other important
information.
/SERVER servername Enter a remote server to run script against.
/USER username Enter Username to impersonate for Remote Connections
(requires PASS switch). Will be ignored if it is for a Local Connection.
/PASS password Enter Password to go with USER switch
(requires USER switch).
Wildcard characters can be used to specify more than one file in a command, such as:
* Any string of zero or more characters
? Any single character
You can specify more than one user in a command.
You can combine access rights.
使用 Xcacls.vbs 查看权限
Xcacls.vbs 还可用于查看文件或文件夹的权限。 例如，如果您有一个名为 C:\Test 的文件夹，在命令提示符处键入以下命令以查看文件夹权限，然后按 Enter：
xcacls.vbs c:\test
下面的示例是一个典型结果：
C:\>XCACLS.VBS c:\test
Microsoft (R) Windows Script Host 5.6
版权所有 (C) Microsoft Corporation 1996-2001。保留所有权利。
Starting XCACLS.VBS (Version: 3.4) Script at 6/11/2003 10:55:21 AM
Startup directory:
"C:\test"
Arguments Used:
Filename = "c:\test"
**************************************************************************
Directory:C:\test
Permissions:
Type Username Permissions Inheritance
Allowed BUILTIN\Administrators Full Control This Folder, Subfolde
Allowed NT AUTHORITY\SYSTEM Full Control This Folder, Subfolde
Allowed Domain1\User1 Full Control This Folder Only
Allowed \CREATOR OWNER Special (Unknown) Subfolders and Files
Allowed BUILTIN\Users Read and Execute This Folder, Subfolde
Allowed BUILTIN\Users Create Folders / Appe This Folder and Subfo
Allowed BUILTIN\Users Create Files / Write This Folder and Subfo
No Auditing set
Owner:Domain1\User1
注意：在该示例中，xcacls.vbs c:\test 命令的输出与显示在图形用户界面 (GUI) 的文本一致。命令窗口的一些文字不完整。
输出还给出了脚本的版本、启动目录和使用的参数。
您还可以使用通配符来显示目录下匹配的文件。例如，如果键入以下命令，将会显示 C:\Test 文件夹中所有具有“.log”扩展名的文件：
xcacls.vbs c:\test\*.log
示例
下列 Xcacls.vbs 命令提供 Xcacls.vbs 用法的一些示例：
xcacls.vbs c:\test\ /g domain\testuser1:f /f /t /e
该命令可编辑现有权限。它授予 Domain\TestUser1 完全控制 C:\Test 下所有文件的权限，遍历 C:\Test 下的子文件夹，然后更改找到的所有文件。该命令不触及目录。
xcacls.vbs c:\test\ /g domain\testuser1:f /s /l "c:\xcacls.log"
该命令可替换现有权限。它授予 Domain\TestUser1 完全控制 C:\Test 下所有子文件夹的权限，而且记录到 C:\Xcacls.log。该命令不触及文件，并且不遍历目录。
xcacls.vbs c:\test\readme.txt /o "machinea\group1"
该命令将自述文件的所有者更改为组 MachineA\Group1。
xcacls.vbs c:\test\badcode.exe /r "machinea\group1" /r "domain\testuser1"
该命令撤消 MachineA\Group1 和 Domain\TestUser1 的 C:\Test\Badcode.exe 权限。
xcacls.vbs c:\test\subdir1 /i enable /q
该命令将打开文件夹 C:\Test\Subdir1 上的继承。该命令将取消任何屏幕输出。
xcacls.vbs \\servera\sharez\testpage.htm /p "domain\group2":14
此命令通过使用 Windows Management Instrumentation (WMI) 远程连接到 \\ServerA\ShareZ。然后获取用于该共享的本地路径，在该路径下，它更改 Testpage.htm 上的权限。它原封保留 Domain\Group2 的现有权限，但是添加权限 1（读取数据）和权限 4（读取扩展属性）。该命令放弃此文件上的其他权限，原因是未使用 /e 开关。
xcacls.vbs d:\default.htm /g "domain\group2":f /server servera /user servera\admin /pass password /e
该命令使用 WMI 作为 ServerA\Admin 远程连接到 ServerA，然后将 Default.htm 上的完全权限授予 Domain\Group2。Domain\Group2 的现有权限丢失，但保留文件上的其他权限。
Microsoft 以 Microsoft Visual Basic 脚本 (Xcacls.vbs) 的形式提供了 Extended Change Access Control List（扩展更改访问控制列表）工具 (Xcacls.exe) 的更新版本。本文分步介绍如何使用 Xcacls.vbs 脚本修改和查看文件或文件夹的 NTFS 文件系统权限。 可以从命令行使用 Xcacls.vbs 设置所有可在 Microsoft Windows 资源管理器中访问的文件系统安全选项。Xcacls.vbs 可显示和修改文件的访问控制列表 (ACL)。
注意：Xcacls.vbs 只与 Microsoft Windows 2000、Microsoft Windows XP 和 Microsoft Windows Server 2003 兼容。Microsoft 不支持 Xcacls.vbs。
回到顶端
设置和使用 Xcacls.vbs
要设置和使用 Xcacls.vbs，请按照下列步骤操作：
从以下 Microsoft 网站获得 Xcacls.vbs 的最新版本：
http://download.microsoft.com/download/f/7/8/f786aaf3-a37b-45ab-b0a2-8c8c18bbf483/XCacls_Installer.exe (http://download.microsoft.com/download/f/7/8/f786aaf3-a37b-45ab-b0a2-8c8c18bbf483/xcacls_installer.exe)
双击“Xcacls_Installer.exe”。当提示您提供放置提取文件的位置时，请指定一个位于计算机的搜索路径设置中的文件夹（如 C:\Windows）。
将默认脚本引擎从 Wscript 更改为 Cscript。（Xcacls.vbs 脚本最适合在 Cscript 下运行。）为此，请在命令提示符下键入以下内容，然后按 Enter：
cscript.exe /h:cscript
注意：将默认脚本引擎更改为 Cscript 只影响脚本向屏幕写入的方式。Wscript 根据“确定”对话框分别写入每一行。Cscript 将每一行写入命令窗口。如果您不想更改默认脚本引擎，则必须使用以下命令运行脚本
cscript.exe xcacls.vbs
但是，如果将默认脚本更改为 Cscript，则可以使用以下命令运行该脚本：
xcacls.vbs
.
要查看 Xcacls.vbs 的命令语法，请在命令提示符处键入下面的命令：
xcacls.vbs /?
Xcacls.vbs 命令的语法
下面 xcacls.vbs /? 命令的输出描述了 Xcacls.vbs 命令的语法：
复制代码 代码如下:
Usage:
XCACLS filename [/E] [/G user:perm;spec] [...] [/R user [...]]
[/F] [/S] [/T]
[/P user:perm;spec [...]] [/D user:perm;spec] [...]
[/O user] [/I ENABLE/COPY/REMOVE] [/N
[/L filename] [/Q] [/DEBUG]
filename [Required] If used alone, it displays ACLs.
(Filename can be a filename, directory name or
wildcard characters and can include the whole
path. If path is missing, it is assumed to be
under the current directory.)
Notes:
- Put filename in quotes if it has spaces or
special characters such as &, $, #, etc.
- If filename is a directory, all files and
subdirectories under it will NOT be changed
unless the /F or S is present.
/F [Used with Directory or Wildcard] This will change all
files under the inputted directory but will NOT
traverse subdirectories unless /T is also present.
If filename is a directory, and /F is not used, no
files will be touched.
/S [Used with Directory or Wildcard] This will change all
subfolders under the inputted directory but will NOT
traverse subdirectories unless /T is also present.
If filename is a directory, and /S is not used, no
subdirectories will be touched.
/T [Used only with a Directory] Traverses each
subdirectory and makes the same changes.
This switch will traverse directories only if the
filename is a directory or is using wildcard characters.
/E Edit ACL instead of replacing it.
/G user:GUI Grant security permissions similar to Windows GUI
standard (non-advanced) choices.
/G user:Perm;Spec Grant specified user access rights.
(/G adds to existing rights for user)
User: If User has spaces in it, enclose it in quotes.
If User contains #machine#, it will replace
#machine# with the actual machine name if it is a
non-domain controller, and replace it with the
actual domain name if it is a domain controller.
New to 3.0: User can be a string representing
the actual SID, but MUST be lead by SID#
Example: SID#S-1-5-21-2127521184-160...
(SID string shown has been shortened)
(If any user has SID# then globally all
matches must match the SID (not name)
so if your intention is to apply changes
to all accounts that match Domain\User
then do not specify SID# as one of the
users.)
GUI: Is for standard rights and can be:
Permissions...
F Full control
M Modify
X read and eXecute
L List folder contents
R Read
W Write
Note: If a ; is present, this will be considered
a Perm;Spec parameter pair.
Perm: Is for "Files Only" and can be:
Permissions...
F Full control
M Modify
X read and eXecute
R Read
W Write
Advanced...
D Take Ownership
C Change Permissions
B Read Permissions
A Delete
9 Write Attributes
8 Read Attributes
7 Delete Subfolders and Files
6 Traverse Folder / Execute File
5 Write Extended Attributes
4 Read Extended Attributes
3 Create Folders / Append Data
2 Create Files / Write Data
1 List Folder / Read Data
Spec is for "Folder and Subfolders only" and has the
same choices as Perm.
/R user Revoke specified user's access rights.
(Will remove any Allowed or Denied ACL's for user.)
/P user:GUI Replace security permissions similar to standard choices.
/P user:perm;spec Replace specified user's access rights.
For access right specification see /G option.
(/P behaves like /G if there are no rights set for user.)
/D user:GUI Deny security permissions similar to standard choices.
/D user:perm;spec Deny specified user access rights.
For access right specification see /G option.
(/D adds to existing rights for user.)
/O user Change the Ownership to this user or group.
/I switch Inheritance flag. If omitted, the default is to not touch
Inherited ACL's. Switch can be:
ENABLE - This will turn on the Inheritance flag if
it is not on already.
COPY - This will turn off the Inheritance flag and
copy the Inherited ACL's
into Effective ACL's.
REMOVE - This will turn off the Inheritance flag and
will not copy the Inherited
ACL's. This is the opposite of ENABLE.
If switch is not present, /I will be ignored and
Inherited ACL's will remain untouched.
/L filename Filename for Logging. This can include a path name
if the file is not under the current directory.
File will be appended to, or created if it does not
exit. Must be Text file if it exists or error will occur.
If filename is omitted, the default name of XCACLS will
be used.
/Q Turn on Quiet mode. By default, it is off.
If it is turned on, there will be no display to the screen.
/DEBUG Turn on Debug mode. By default, it is off.
If it is turned on, there will be more information
displayed and/or logged. Information will show
Sub/Function Enter and Exit as well as other important
information.
/SERVER servername Enter a remote server to run script against.
/USER username Enter Username to impersonate for Remote Connections
(requires PASS switch). Will be ignored if it is for a Local Connection.
/PASS password Enter Password to go with USER switch
(requires USER switch).
Wildcard characters can be used to specify more than one file in a command, such as:
* Any string of zero or more characters
? Any single character
You can specify more than one user in a command.
You can combine access rights.
使用 Xcacls.vbs 查看权限
Xcacls.vbs 还可用于查看文件或文件夹的权限。 例如，如果您有一个名为 C:\Test 的文件夹，在命令提示符处键入以下命令以查看文件夹权限，然后按 Enter：
xcacls.vbs c:\test
下面的示例是一个典型结果：
复制代码 代码如下:
C:\>XCACLS.VBS c:\test
Microsoft (R) Windows Script Host 5.6
版权所有 (C) Microsoft Corporation 1996-2001。保留所有权利。
Starting XCACLS.VBS (Version: 3.4) Script at 6/11/2003 10:55:21 AM
Startup directory:
"C:\test"
Arguments Used:
Filename = "c:\test"
**************************************************************************
Directory:C:\test
Permissions:
Type Username Permissions Inheritance
Allowed BUILTIN\Administrators Full Control This Folder, Subfolde
Allowed NT AUTHORITY\SYSTEM Full Control This Folder, Subfolde
Allowed Domain1\User1 Full Control This Folder Only
Allowed \CREATOR OWNER Special (Unknown) Subfolders and Files
Allowed BUILTIN\Users Read and Execute This Folder, Subfolde
Allowed BUILTIN\Users Create Folders / Appe This Folder and Subfo
Allowed BUILTIN\Users Create Files / Write This Folder and Subfo
No Auditing set
Owner:Domain1\User1
注意：在该示例中，xcacls.vbs c:\test 命令的输出与显示在图形用户界面 (GUI) 的文本一致。命令窗口的一些文字不完整。
输出还给出了脚本的版本、启动目录和使用的参数。
您还可以使用通配符来显示目录下匹配的文件。例如，如果键入以下命令，将会显示 C:\Test 文件夹中所有具有“.log”扩展名的文件：
xcacls.vbs c:\test\*.log
示例
下列 Xcacls.vbs 命令提供 Xcacls.vbs 用法的一些示例：
xcacls.vbs c:\test\ /g domain\testuser1:f /f /t /e
该命令可编辑现有权限。它授予 Domain\TestUser1 完全控制 C:\Test 下所有文件的权限，遍历 C:\Test 下的子文件夹，然后更改找到的所有文件。该命令不触及目录。
xcacls.vbs c:\test\ /g domain\testuser1:f /s /l "c:\xcacls.log"
该命令可替换现有权限。它授予 Domain\TestUser1 完全控制 C:\Test 下所有子文件夹的权限，而且记录到 C:\Xcacls.log。该命令不触及文件，并且不遍历目录。
xcacls.vbs c:\test\readme.txt /o "machinea\group1"
该命令将自述文件的所有者更改为组 MachineA\Group1。
xcacls.vbs c:\test\badcode.exe /r "machinea\group1" /r "domain\testuser1"
该命令撤消 MachineA\Group1 和 Domain\TestUser1 的 C:\Test\Badcode.exe 权限。
xcacls.vbs c:\test\subdir1 /i enable /q
该命令将打开文件夹 C:\Test\Subdir1 上的继承。该命令将取消任何屏幕输出。
xcacls.vbs \\servera\sharez\testpage.htm /p "domain\group2":14
此命令通过使用 Windows Management Instrumentation (WMI) 远程连接到 \\ServerA\ShareZ。然后获取用于该共享的本地路径，在该路径下，它更改 Testpage.htm 上的权限。它原封保留 Domain\Group2 的现有权限，但是添加权限 1（读取数据）和权限 4（读取扩展属性）。该命令放弃此文件上的其他权限，原因是未使用 /e 开关。
xcacls.vbs d:\default.htm /g "domain\group2":f /server servera /user servera\admin /pass password /e
该命令使用 WMI 作为 ServerA\Admin 远程连接到 ServerA，然后将 Default.htm 上的完全权限授予 Domain\Group2。Domain\Group2 的现有权限丢失，但保留文件上的其他权限。
相关文章
Windows下bat批处理脚本使用telnet批量检测远程端口小记
这篇文章主要介绍了Windows下bat批处理脚本使用telnet批量检测远程端口小记,需要的朋友可以参考下2015-09-09
这篇文章主要介绍了解决bat批处理输出乱码的问题,本文通过图文并茂的形式给大家介绍的非常详细，对大家的学习或工作具有一定的参考借鉴价值，需要的朋友可以参考下2021-04-04
这篇文章主要介绍了bat根据当前日期创建文件夹的相关知识，本文给大家介绍的非常详细，对大家的学习或工作具有一定的参考借鉴价值,需要的朋友可以参考下2022-03-03
计算机信息处理...2006-09-09
DOS命令总共大约有一百个（包括文本编辑、查杀病毒、配置文件、批处理等）常用的也就是为数不多的一二十个,我们就介绍常用的DOS命令2023-10-10
我想用批处理创建一个带日期的文件夹，比如：照片200809 其中“照片”是特定的字符，"200809” 系统的当前年份和朋份2010-11-11
这篇文章主要介绍了wmic 命令用法及实例,需要的朋友可以参考下2014-05-05
format命令 参数说明...2007-09-09
这篇文章主要介绍了BAT批处理判断目录在%Path%中实现方法,即实现判断一个目录是否在某个文件夹中,需要的朋友可以参考下2015-06-06
批处理文件是一种非常实用的工具,本文主要介绍了批处理脚本的基本技巧,文中通过示例代码介绍的非常详细,对大家的学习或者工作具有一定的参考学习价值,需要的朋友们下面随着小编来一起学习学习吧2024-07-07
最新评论