AngularGauge 属性解析详解
<Chart bgColor='FFFFFF' upperLimit='120' lowerLimit='0' baseFontColor='666666' majorTMNumber='10' majorTMColor='666666' majorTMHeight='8' minorTMNumber='5' minorTMColor='666666' minorTMHeight='3' pivotRadius='10' showGaugeBorder='0' gaugeOuterRadius='100' gaugeInnerRadius='90' gaugeOriginX='170' gaugeOriginY='170' gaugeScaleAngle='220' displayValueDistance='20' placeValuesInside='1' gaugeFillMix='' pivotFillMix='{F0EFEA}, {BEBCB0}' pivotBorderColor='BEBCB0' pivotfillRatio='80,50' showShadow='0'> <colorRange> <color minValue='0' maxValue='84' code='00FF00' alpha='0'/> <color minValue='80' maxValue='100' name='Danger' code='FF0000' alpha='50'/> </colorRange> <dials> <dial value='50' bordercolor='#FF3333' bgColor='bebcb0, f0efea, bebcb0' borderAlpha='0' baseWidth='10' topWidth='3'/> </dials> <annotations> <annotationGroup xPos='170' yPos='170' fillRatio='10,125,254' fillPattern='radial' > <!-- Draw the upper White Rounded Border --> <annotation type='circle' xPos='0' yPos='0' radius='150' borderColor= 'bebcb0' fillAsGradient='1' fillColor='f0efea, bebcb0' fillRatio='85,15'/> <annotation type='circle' xPos='0' yPos='0' radius='140' fillColor='bebcb0, f0efea' fillRatio='85,15' /> <annotation type='circle' xPos='0' color='FFFFFF' yPos='0' radius='140' borderColor= 'f0efea' /> </annotationGroup> </annotations> </Chart>
-------------------------仪表盘重要属性解析-----------------------
根节点<Chart 属性:
upperLimit='120' --刻度值上限
lowerLimit='0' --刻度值下限
Limits='0/1' --是否显示极限值
baseFontColor='#FF3333' --刻度值字体颜色
majorTMNumber='12' --需要将仪表盘分成的等份值
majorTMColor='#FF3333' --刻度线的颜色
majorTMHeight='8' --刻度线的长度
minorTMNumber='5' --仪表盘刻度线间小刻度线的数量
minorTMColor='#FF3333' --仪表盘刻度线间小刻度线颜色
minorTMHeight='5' --仪表盘刻度线间小刻度线长度
pivotRadius='20' --针心圆半径
showGaugeBorder='1' --是否显示刻度盘边框
gaugeOuterRadius='130' --刻度盘外围半径
gaugeInnerRadius='110' --刻度盘内围半径
gaugeOriginX='170' --刻度盘圆心X坐标
gaugeOriginY='170' --刻度盘圆心Y坐标
gaugeScaleAngle='200' --刻度盘比例(度数)
displayValueDistance='20' --显示值与刻度线的距离
placeValuesInside='1' --显示值是否位于刻度盘的内部
gaugeFillMix='' --刻度盘颜色是否混合
pivotFillMix='{F0EFEA}, {BEBCB0}' --仪表盘轴心是否混合
pivotBorderColor='BEBCB0' --轴心边框颜色
pivotfillRatio='80,50' --轴心比率
showShadow='0' --是否显示阴影
颜色范围:
<colorRange>
<color minValue='0' maxValue='84' code='00FF00' alpha='0'/>
<color minValue='80' maxValue='100' name='Danger' code='FF0000' alpha='50'/>
</colorRange>
此节点的原理及应用:
通过两种不同的颜色拼接成刻度盘底色,可用于提醒指示到一定区域了;
转盘:
<dials>
<dial value='50' bordercolor='#FF3333' bgColor='bebcb0, f0efea, bebcb0' borderAlpha='0' baseWidth='10' topWidth='3'/>
</dials>
value='50' --指针指示值
borderAlpha='10' --指针边线的颜色深度
baseWidth='10' --只针的宽度
topWidth='3' --指针尖端的宽度
仪表盘外围控件:
<annotations> <annotationGroup xPos='170' yPos='170' fillRatio='225,225,254' fillPattern='radial' Alpha='11' > <annotation type='circle' xPos='0' yPos='0' radius='150' borderColor= 'bebcb0' fillAsGradient='1' fillColor='f0efea, bebcb0' fillRatio='85,15'/> <annotation type='circle' xPos='0' yPos='0' radius='140' fillColor='bebcb0, f0efea' fillRatio='85,15' /> <annotation type='circle' xPos='0' yPos='0' radius='140' borderColor= 'f0efea' color='FFFFFF'/>
<chart bgAlpha='0' bgColor='FFFFFF' lowerLimit='0' upperLimit='100' numberSuffix='%25' showBorder='0' basefontColor='FFFFDD' chartTopMargin='25' chartBottomMargin='25' chartLeftMargin='25' chartRightMargin='25' toolTipBgColor='80A905' gaugeFillMix='{dark-10},FFFFFF,{dark-10}' gaugeFillRatio='3'> <colorRange> <color minValue='0' maxValue='45' code='FF654F'/> <color minValue='45' maxValue='80' code='F6BD0F'/> <color minValue='80' maxValue='100' code='8BBA00'/> </colorRange> <dials> <dial value='92' rearExtension='10'/> </dials> <trendpoints> <point value='50' displayValue='Average' fontcolor='FF4400' useMarker='1' dashed='1' dashLen='2' dashGap='2' valueInside='1' /> </trendpoints> <!--Rectangles behind the gauge --> <annotations> <annotationGroup id='Grp1' showBelow='1' > <annotation type='rectangle' x='5' y='5' toX='345' toY='195' radius='10' color='009999,333333' showBorder='0' /> </annotationGroup> </annotations> <styles> <definition> <style name='RectShadow' type='shadow' strength='3'/> </definition> <application> <apply toObject='Grp1' styles='RectShadow' /> </application> </styles> </chart>
-------------------------仪表盘重要属性解析-----------------------
<chart
numberSuffix='%25' --数值后缀%
chartTopMargin='25' --到容器顶端的距离
chartBottomMargin='25' --到容器底端的距离
chartLeftMargin='25' --到容器左端的距离
chartRightMargin='25' --到容器右端的距离
gaugeFillRatio='11' --刻度盘背景颜色比例
<annotationGroup showBelow='1' --显示在XX下面
以上就是对AngularGauge 属性资料的整理,后续继续补充相关资料,谢谢大家对本站的支持!
相关文章
详解Angular 中 ngOnInit 和 constructor 使用场景
最初学习Angular的时候总是搞不清楚ngOnInit和constructor的区别,现在我们来稍微理一下两者之间的区别。2017-06-06angular.js指令中transclude选项及ng-transclude指令详解
这篇文章主要研究一下如何使用ng-transclude指令,以及指令的transclude选项的相关资料,文中介绍的非常详细,并给出了完整的示例代码大家参考学习,需要的朋友们下面来一起看看吧。2017-05-05Angular懒加载模块与Combined Injector原理全面解析
这篇文章主要为大家介绍了Angular懒加载模块与Combined Injector原理全面解析,有需要的朋友可以借鉴参考下,希望能够有所帮助,祝大家多多进步,早日升职加薪2023-10-10
最新评论