CentOS中yum 源的配置与使用详解

# rpm -qa|grep yum

# rpm -e yum-fastestmirror-1.1.16-14.el5.centos.1 yum-metadata-parser-1.1.2-3.el5.centos yum-3.2.22-33.el5.centos

# mount /dev/cdrom /mnt/cdrom/

# rpm -ivh yum-3.2.22-33.el5.centos.noarch.rpm yum-fastestmirror-1.1.16-14.el5.centos.1.noarch.rpm yum-metadata-parser-1.1.2-3.el5.centos.i386.rpm

# yum -v

# cat /etc/yum.conf

[main]
cachedir=/var/cache/yum
　　//yum 缓存的目录，yum 在此存储下载的rpm 包和数据库，默认设置为/var/cache/yum
keepcache=0
　　//安装完成后是否保留软件包，0为不保留（默认为0），1为保留
debuglevel=2
　　//Debug 信息输出等级，范围为0-10，缺省为2
logfile=/var/log/yum.log
　　//yum 日志文件位置。用户可以到/var/log/yum.log 文件去查询过去所做的更新。
pkgpolicy=newest
　　//包的策略。一共有两个选项，newest 和last，这个作用是如果你设置了多个repository，而同一软件在不同的repository 中同时存在，yum 应该安装哪一个，如果是newest，则yum 会安装最新的那个版本。如果是last，则yum 会将服务器id 以字母表排序，并选择最后的那个服务器上的软件安装。一般都是选newest。
distroverpkg=redhat-release
　　//指定一个软件包，yum 会根据这个包判断你的发行版本，默认是redhat-release，也可以是安装的任何针对自己发行版的rpm 包。
tolerant=1
　　//有1和0两个选项，表示yum 是否容忍命令行发生与软件包有关的错误，比如你要安装1,2,3三个包，而其中3此前已经安装了，如果你设为1,则yum 不会出现错误信息。默认是0。
exactarch=1
　　//有1和0两个选项，设置为1，则yum 只会安装和系统架构匹配的软件包，例如，yum 不会将i686的软件包安装在适合i386的系统中。默认为1。
retries=6
　　//网络连接发生错误后的重试次数，如果设为0，则会无限重试。默认值为6.
obsoletes=1
　　//这是一个update 的参数，具体请参阅yum(8)，简单的说就是相当于upgrade，允许更新陈旧的RPM包。
plugins=1
　　//是否启用插件，默认1为允许，0表示不允许。我们一般会用yum-fastestmirror这个插件。
bugtracker_url=http://bugs.centos.org/set_project.php?project_id=16&ref=http://bugs.centos.org/bug_report_page.php?category=yum

# Note: yum-RHN-plugin doesn't honor this.
metadata_expire=1h

installonly_limit = 5

# PUT YOUR REPOS HERE OR IN separate files named file.repo
# in /etc/yum.repos.d

# mount /dev/cdrom /mnt/cdrom/

# cd /etc/yum.repos.d/

# ls

# cat CentOS-Media.repo

# CentOS-Media.repo
#
# This repo is used to mount the default locations for a CDROM / DVD on
# CentOS-5. You can use this repo and yum to install items directly off the
# DVD ISO that we release.
#
# To use this repo, put in your DVD and use it with the other repos too:
# yum --enablerepo=c5-media [command]
# 
# or for ONLY the media repo, do this:
#
# yum --disablerepo=\* --enablerepo=c5-media [command]
 
[c5-media]
name=CentOS-$releasever - Media
baseurl=file:///media/CentOS/
  file:///mnt/cdrom/
  file:///media/cdrecorder/
gpgcheck=1
enabled=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-5

# yum install postgresql

baseurl=url://server1/path/to/repository/
　　　　 url://server2/path/to/repository/
　　　　 url://server3/path/to/repository/

baseurl=url://server1/path/to/repository/
baseurl=url://server2/path/to/repository/
baseurl=url://server3/path/to/repository/

[updates-released]
name=Fedora Core $releasever - $basearch - Released Updates
baseurl=http://download.atrpms.net/mirrors/fedoracore/updates/$releasever/$basearch
　　　　 http://redhat.linux.ee/pub/fedora/linux/core/updates/$releasever/$basearch
　　　　 http://fr2.rpmfind.net/linux/fedora/core/updates/$releasever/$basearch
gpgcheck=1
exclude=gaim
failovermethod=priority

# CentOS-Base.repo
#
# The mirror system uses the connecting IP address of the client and the
# update status of each mirror to pick mirrors that are updated to and
# geographically close to the client. You should use this for CentOS updates
# unless you are manually picking other mirrors.
#
# If the mirrorlist= does not work for you, as a fall back you can try the 
# remarked out baseurl= line instead.
#
#

[base]
name=CentOS-$releasever - Base
#mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=os
baseurl=http://ftp.sjtu.edu.cn/centos/$releasever/os/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-5

#released updates 
[updates]
name=CentOS-$releasever - Updates
#mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=updates
baseurl=http://ftp.sjtu.edu.cn/centos/$releasever/updates/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-5

#additional packages that may be useful
[extras]
name=CentOS-$releasever - Extras
#mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=extras
baseurl=http://ftp.sjtu.edu.cn/centos/$releasever/extras/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-5

#additional packages that extend functionality of existing packages
[centosplus]
name=CentOS-$releasever - Plus
#mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=centosplus
baseurl=http://ftp.sjtu.edu.cn/centos/$releasever/centosplus/$basearch/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-5

#contrib - packages by Centos Users
[contrib]
name=CentOS-$releasever - Contrib
#mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=contrib
baseurl=http://ftp.sjtu.edu.cn/centos/$releasever/contrib/$basearch/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-5

# yum -y install yum-priorities

[base]
name=CentOS-$releasever - Base
#mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=os
baseurl=http://ftp.sjtu.edu.cn/centos/$releasever/os/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-5
priority=1

# wget http://pkgs.repoforge.org/rpmforge-release/rpmforge-release-0.5.2-2.el5.rf.i386.rpm

# rpm --import http://apt.sw.be/RPM-GPG-KEY.dag.txt

# rpm -K rpmforge-release-0.5.2-2.el5.rf.*.rpm

# rpm -i rpmforge-release-0.5.2-2.el5.rf.i386.rpm

[root@TS-DEV yum.repos.d]# cat rpmforge.repo

### Name: RPMforge RPM Repository for RHEL 5 - dag
### URL: http://rpmforge.net/
[rpmforge]
name = RHEL $releasever - RPMforge.net - dag
baseurl = http://apt.sw.be/redhat/el5/en/$basearch/rpmforge
mirrorlist = http://apt.sw.be/redhat/el5/en/mirrors-rpmforge
#mirrorlist = file:///etc/yum.repos.d/mirrors-rpmforge
enabled = 1
protect = 0
gpgkey = file:///etc/pki/rpm-gpg/RPM-GPG-KEY-rpmforge-dag
gpgcheck = 1
priority=12

# yum install htop